[arm-allstar] Built In Fan Control Script

[David H.]

Thanks Doug. There's a typo in the script that has that extra x. I fixed it rpt.conf, and restarted Asterisk, then ran fan_control.sh again. It didn't change anything though. It's still exhibiting the same symptoms.

---
Sent via my Samsung A51 5G on the T-Mobile network.
From: Doug Crompton <wa3dsp at gmail.com>
Sent: Friday, October 2, 2020, 13:32
Cc: David H.
Subject: Re: [arm-allstar] Built In Fan Control Script

Extra X in tx TXKEYED.  The messages only happen when you run it in the foreground for reference.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


On Fri, Oct 2, 2020 at 8:54 AM "David H. via ARM-allstar" <arm-allstar at hamvoip.org> wrote:
I’ve usually had pretty good luck trying to figure out how to get mist of the scripts working, but I don’t have a whole lot of spare time at the moment, so I’ll ask for some help this time around.



I’m trying to use the built in fan control script.  I’ve added this to {events51644] in rpt.conf



touch /tmp/RPT_TXXKEYED = s|t|RPT_TXKEYED

rm -f /tmp/RPT_TXKEYED = s|f|RPT_TXKEYED



When I run fan_control.sh it just keeps scrolling “no tx” down the screen in the bash shell interface.  Under the CLI interface it doesn’t show anything when I key up.  When I unkey it shows this:



Event on node 51644 doing rpt command cop,62,GPIO4:0 for condition c|f|RPT_RXKEYED

Event on node 51644 doing shell command touch /tmp/RPT_TXXKEYED for condition s|t|RPT_TXKEYED



Any ideas what I missed somewhere? 





---

Sent From Mail For Windows 10 On My HP Envy x360 Ultrabook.



_______________________________________________



ARM-allstar mailing list

ARM-allstar at hamvoip.org

http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar



Visit the BBB and RPi2/3/4 web page - http://hamvoip.org