[arm-allstar] DTMF node connection not working

[David McGough]

When trying to connect, if the node number you're trying to connect 
to isn't found, no voice messages are currently sent.

Another thing to check: Are you sure DTMF is being decoded properly? 
You can test this by watching the asterisk CLI (console), while sending 
DTMF to the receiver. Properly decoded DTMF digits will show up on the 
screen.


73, David KB4FXC


On Mon, 2 Nov 2020, "John Simmons via ARM-allstar" wrote:

> My system has 3 nodes that connect at startup: one receiver, one 
> transmitter and one transceiver for linking. Repeater functions are all 
> fine. DTMF decoding on both receivers works fine every time according to 
> the Asterisk CLI.
> 
> All systems are up-to-date with the latest HamVoip code. No changes have 
> been made to the function stanzas since the install.
> 
> *70 on both receivers reports status just fine.
> 
> Using Supermon to connect to a remote node works great.
> 
> If I send *3(5 digit node #) results in no reaction- no voice, nothing.
> 
> What am I missing?
> 
> -de John NI0K
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>