[arm-allstar] Remote Putty syntax

Doug Crompton wa3dsp at gmail.com
Fri May 29 13:35:25 EDT 2020


You can use a Hamvoip node to do that if you have one available -

allstar_ssh.sh node <port>      If port is left out defaults to 222

Then login.

Using putty   you need to know the public IP and port. To find the public
IP do -

dns-query node

Use that IP address and port 222. Login as user root and the password.

Note that in all cases the server you are connecting to has to have port
forwarding of the ssh port - 222 in this case TCP to the local IP address
of the server.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Fri, May 29, 2020 at 1:30 PM "Joe Orrico via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> What is the syntax for entering the node IP for a remote node using putty?
>
>
>
> I'm in California and tying to log in to the node at my daughters house in
> Connecticut to do updates etc remotely.
>
>
>
> I know it has to be some combination of the providers IP and the LAN IP or
> UDP port. The ssh port is still 222.
>
>
>
>
>
> Joe Orrico
>
> WB6HRO / WR6AAC Repeater
>
>
>
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>


More information about the ARM-allstar mailing list