[arm-allstar] Direwolf from the Control Panel

[Doug Crompton]

Mal,

 You probably will need to kill the direwolf process. Try   killall
direwolf   - in another Linux session while direwolf is running assuming
that is the name of the running process. Like...

direoff=cmd,/usr/bin/killall direwolf

*73 Doug, WA3DSP*
*http://wa3dsp.org <http://wa3dsp.org>*

On Mon, May 4, 2020 at 10:27 PM "Mal VK8MT via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi again
>
> Thanks, for the info thus far.
>
> I needed to install 'screen'.  Thanks David KB4FXC (from an old post). This
> (as recommended by Doug) worked:-
>
> direon=cmd,/usr/local/aprs-tools/etc/dw-start.sh
>
> Although I needed to modify dw-start.sh  by adding a path to my
> direwolf.conf file.
>
> #DWCMD="$DIREWOLF -a 100"
> DWCMD="$DIREWOLF -c /home/direwolf.conf -a 100"
>
> You can check that it is running by using the following commands: -
>
> "screen -list" and "screen -D -r direwolf"
>
> You can again "detach" from the Direwolf screen session with control-a then
> "d" at any time and direwolf will continue to run.  (This from the Direwolf
> User Guide p.28)
>
> Can anyone help with what a dw-stop.sh script would look like?
>
> When I run it from the Bash Shell Interface, I just send a Ctrl C and it
> exits.
>
> We are making progress, thanks to those who have provided assistance.
>
> Mal
>
>
>
>
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>