[arm-allstar] Eannmode set to 2 in rpt.conf but no echolink announcement received

[KK4MJZ Repeater Admin]

David, you are a genius!  This worked perfectly!  Default was set to only my telemetry actions #2.  A lot of guides do not cross reference this, so I thank you highly!

> On Mar 31, 2020, at 14:06, David McGough <kb4fxc at inttek.net> wrote:
> 
> 
> Hi,
> 
> Check the telemdefault parameter in your rpt.conf node stanza and set it 
> to:
> 
> telemdefault=1
> 
> And, restart.
> 
> 
> 73, David KB4FXC
> 
> 
>> On Tue, 31 Mar 2020, "KK4MJZ Repeater Admin via ARM-allstar" wrote:
>> 
>> Just following back on this.  Am I in the correct forums for this type of question?  ASL/echolink regarding configuration of the rpt.conf file?
> 
>>> On Mar 30, 2020, at 15:19, KK4MJZ Repeater Admin via ARM-allstar 
>> <arm-allstar at hamvoip.org> wrote:
>> 
>> Hello group.  In rpt.conf on my first node stanza I have set 
> eannmode=2 and uncommented it, however I am not hearing it come through 
> my repeater on my asl/echolink Connection.  When they connect via 
> echolink, it connects fine, just no announcement.
>> _______________________________________________
>> 
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>