[arm-allstar] FW: HF control

[David McGough]

Les,

Have you tried inverting the default COS setting and saving?  This is 
option j from simpleusb-tune-menu. Switch this setting from "usb" to 
"usbinvert" or vice-versa.

73, David KB4FXC




On Thu, 12 Mar 2020, "Les bradshaw via ARM-allstar" wrote:

> I am using one node at each end, the HF node ( At Home) is always being
> heard on the radio-less node (Away from Home). That is working, ( but only
> when I go to the simple usb settings and change setting (K) to key then all
> works will). Now the problem is if I save those setting in simple usb and
> the pi get rebooted then the (K) setting goes back to default setting
> unkeyed.
> I am just looking for a way to get around having to reset that setting if I
> am not home and the pi reboots.
> Thanks,
> Les
> 
> On Wed, Mar 4, 2020 at 2:57 PM "Doug Crompton via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
> > Les,
> >
> >  Do you need to toggle the keying? Is this just monitor mode or are you
> > also Transmitting audio on HF?
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> > On Wed, Mar 4, 2020 at 3:53 PM "Les Bradshaw via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Doug ,
> > >         Please see info below, I have another question is it possible
> > > after connecting node (1) to node (2) to be able to send a DTMF tone from
> > > node (1) to node (2) that will toggle the simpleusb (K) (COS Keyed )
> > > command ?
> > > Thanks,
> > > Les
> > > N5LMB
> > >
> > > Sent from Mail for Windows 10
> > >
> > > From: Les Bradshaw
> > > Sent: Wednesday, March 4, 2020 9:46 AM
> > > To: arm-allstar at hamvoip.org
> > > Subject: Re: [arm-allstar] HF control
> > >
> > > I am working on setting up two nodes so I can connect to my HF rig
> > Remote,
> > > node (1) is radio-less set at duplex=0. Node (2) HF Node is set duplex=0,
> > > All works well after I boot them up and connect Node (1) to Node (2)
> > then I
> > > have to go to simpleusb on Node(2) and set setting (K) to Keyed to get
> > > audio from the HF Node (2) to Radio-less node (1)  then all works well
> > then
> > > have to key Node(1) to reset time when audio drops out witch is no
> > problem.
> > > My Question is how can I set Node (2) HF node to COS Keyed after I
> > connect
> > > to it without having to go to simpleusb or is there a better way to set
> > > this up ?
> > > Thanks,
> > > Les
> > > N5LMB
> > >
> > >
> > > Sent from Mail for Windows 10
> > >
> > >
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>