[arm-allstar] FW: HF control

[Les bradshaw]

I am using one node at each end, the HF node ( At Home) is always being
heard on the radio-less node (Away from Home). That is working, ( but only
when I go to the simple usb settings and change setting (K) to key then all
works will). Now the problem is if I save those setting in simple usb and
the pi get rebooted then the (K) setting goes back to default setting
unkeyed.
I am just looking for a way to get around having to reset that setting if I
am not home and the pi reboots.
Thanks,
Les

On Wed, Mar 4, 2020 at 2:57 PM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Les,
>
>  Do you need to toggle the keying? Is this just monitor mode or are you
> also Transmitting audio on HF?
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Wed, Mar 4, 2020 at 3:53 PM "Les Bradshaw via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Doug ,
> >         Please see info below, I have another question is it possible
> > after connecting node (1) to node (2) to be able to send a DTMF tone from
> > node (1) to node (2) that will toggle the simpleusb (K) (COS Keyed )
> > command ?
> > Thanks,
> > Les
> > N5LMB
> >
> > Sent from Mail for Windows 10
> >
> > From: Les Bradshaw
> > Sent: Wednesday, March 4, 2020 9:46 AM
> > To: arm-allstar at hamvoip.org
> > Subject: Re: [arm-allstar] HF control
> >
> > I am working on setting up two nodes so I can connect to my HF rig
> Remote,
> > node (1) is radio-less set at duplex=0. Node (2) HF Node is set duplex=0,
> > All works well after I boot them up and connect Node (1) to Node (2)
> then I
> > have to go to simpleusb on Node(2) and set setting (K) to Keyed to get
> > audio from the HF Node (2) to Radio-less node (1)  then all works well
> then
> > have to key Node(1) to reset time when audio drops out witch is no
> problem.
> > My Question is how can I set Node (2) HF node to COS Keyed after I
> connect
> > to it without having to go to simpleusb or is there a better way to set
> > this up ?
> > Thanks,
> > Les
> > N5LMB
> >
> >
> > Sent from Mail for Windows 10
> >
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>