[arm-allstar] FW: HF control

[Rick Dykstra]

Les,

Not sure what HF radio you're trying to control. I'd suggest using 
squelch as a COR and connect it to the CTCSS input. Adjust the squelch 
as needed. If it's a newer radio, you may be able to send DTMF commands 
to adjust the squelch as needed.

Rick


On 3/6/2020 1:14 AM, "Les bradshaw via ARM-allstar" wrote:
> I am Transmitting on the HF rig it  works well. The problem is having to go
> to node (2) to toggle the (K) so I can get receive audio from the HF rig on
> Node (1). If node (2) was to reboot and I was not there then that would be
> a problem.
>
> On Wed, Mar 4, 2020 at 2:57 PM "Doug Crompton via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Les,
>>
>>   Do you need to toggle the keying? Is this just monitor mode or are you
>> also Transmitting audio on HF?
>>
>>
>> *73 Doug*
>>
>> *WA3DSP*
>>
>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>
>> On Wed, Mar 4, 2020 at 3:53 PM "Les Bradshaw via ARM-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>>
>>> Doug ,
>>>          Please see info below, I have another question is it possible
>>> after connecting node (1) to node (2) to be able to send a DTMF tone from
>>> node (1) to node (2) that will toggle the simpleusb (K) (COS Keyed )
>>> command ?
>>> Thanks,
>>> Les
>>> N5LMB
>>>
>>> Sent from Mail for Windows 10
>>>
>>> From: Les Bradshaw
>>> Sent: Wednesday, March 4, 2020 9:46 AM
>>> To: arm-allstar at hamvoip.org
>>> Subject: Re: [arm-allstar] HF control
>>>
>>> I am working on setting up two nodes so I can connect to my HF rig
>> Remote,
>>> node (1) is radio-less set at duplex=0. Node (2) HF Node is set duplex=0,
>>> All works well after I boot them up and connect Node (1) to Node (2)
>> then I
>>> have to go to simpleusb on Node(2) and set setting (K) to Keyed to get
>>> audio from the HF Node (2) to Radio-less node (1)  then all works well
>> then
>>> have to key Node(1) to reset time when audio drops out witch is no
>> problem.
>>> My Question is how can I set Node (2) HF node to COS Keyed after I
>> connect
>>> to it without having to go to simpleusb or is there a better way to set
>>> this up ?
>>> Thanks,
>>> Les
>>> N5LMB
>>>
>>>
>>> Sent from Mail for Windows 10
>>>
>>>
>>> _______________________________________________
>>>
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org