[arm-allstar] DTMF Not Passing Past Allstar

[Doug Crompton]

Some cop commands give a confirmation beep or possibly a voice response.
Why don't you try what I say and see what happens. You said you want to
execute a COP command with PTT so this is the way to do it. It could also
be done with supermon. I can't offer you anything else. I still don't
understand exactly what your goal is? Do you want to turn off
connect/disconnect messages? I told you how to do that also.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Thu, Mar 5, 2020 at 1:25 AM kg5rdf <kg5rdf at gmail.com> wrote:

> Doug,
>
> I have no idea what you mean by voice or tone feedback. In either case is
> there a way to inhibited ptt on a cop command regardless of any other
> setting?
>
> Thanks KG5RDF
>
>
>
> Sent from my T-Mobile 4G LTE Device
>
>
> -------- Original message --------
> From: Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org>
> Date: 3/4/20 11:56 PM (GMT-06:00)
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] DTMF Not Passing Past Allstar
>
> As I said - log into the system you want to control. At the main menu
> select the Asterisk client. In the client at the CLI prompt give the
> command..... Like
>
> rpt cmd NODE#  cop,x
>
> Where NODE# is actual noose number and x is command.
>
> This will execute the command and nothing will go out over the air unless
> the command has voice or tone feedback.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Wed, Mar 4, 2020 at 11:41 PM kg5rdf <kg5rdf at gmail.com> wrote:
>
> > Doug,
> >
> > Understand the below, I want to be able to send a specific cop command
> and
> > not have ppt invoked when sent. I want Allstar only listen to the
> command.
> >
> > David KG5RDF
> >
> >
> > -------- Original message --------
> > From: Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org>
> > Date: 3/4/20 10:15 PM (GMT-06:00)
> > To: ARM Allstar <arm-allstar at hamvoip.org>
> > Cc: Doug Crompton <wa3dsp at gmail.com>
> > Subject: Re: [arm-allstar] DTMF Not Passing Past Allstar
> >
> > Dave,
> >
> >   You can send any command using the client. Login to the site, select
> > client in the menu, and issue the command. If you want to turn off all
> > connect/disconnect messages edit the rpt.conf file and set
> telemdefualt=0.
> > Then do a restart or reboot.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> >
> > On Wed, Mar 4, 2020 at 11:12 PM "kg5rdf via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Is there a way to issue a COP command, via Asterisk, and not let it
> pass
> > > outside of the Allstar node. I do not want it to be sent down stream
> to a
> > > controller?I want to turn off connecting to node. Have conflict with
> > > controller. David KG5RDD
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>