[arm-allstar] DTMF Not Passing Past Allstar

[kg5rdf]

Doug,I have no idea what you mean by voice or tone feedback. In either case is there a way to inhibited ptt on a cop command regardless of any other setting?Thanks KG5RDFSent from my T-Mobile 4G LTE Device
-------- Original message --------From: Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org> Date: 3/4/20  11:56 PM  (GMT-06:00) To: ARM Allstar <arm-allstar at hamvoip.org> Cc: Doug Crompton <wa3dsp at gmail.com> Subject: Re: [arm-allstar] DTMF Not Passing Past Allstar As I said - log into the system you want to control. At the main menuselect the Asterisk client. In the client at the CLI prompt give thecommand..... Likerpt cmd NODE#  cop,xWhere NODE# is actual noose number and x is command.This will execute the command and nothing will go out over the air unlessthe command has voice or tone feedback.*73 Doug**WA3DSP**http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*On Wed, Mar 4, 2020 at 11:41 PM kg5rdf <kg5rdf at gmail.com> wrote:> Doug,>> Understand the below, I want to be able to send a specific cop command and> not have ppt invoked when sent. I want Allstar only listen to the command.>> David KG5RDF>>> -------- Original message --------> From: Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org>> Date: 3/4/20 10:15 PM (GMT-06:00)> To: ARM Allstar <arm-allstar at hamvoip.org>> Cc: Doug Crompton <wa3dsp at gmail.com>> Subject: Re: [arm-allstar] DTMF Not Passing Past Allstar>> Dave,>>   You can send any command using the client. Login to the site, select> client in the menu, and issue the command. If you want to turn off all> connect/disconnect messages edit the rpt.conf file and set telemdefualt=0.> Then do a restart or reboot.>>> *73 Doug*>> *WA3DSP*>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*>>>> On Wed, Mar 4, 2020 at 11:12 PM "kg5rdf via ARM-allstar" <> arm-allstar at hamvoip.org> wrote:>> > Is there a way to issue a COP command, via Asterisk, and not let it pass> > outside of the Allstar node. I do not want it to be sent down stream to a> > controller?I want to turn off connecting to node. Have conflict with> > controller. David KG5RDD> > _______________________________________________> >> > ARM-allstar mailing list> > ARM-allstar at hamvoip.org> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar> >> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org> _______________________________________________>> ARM-allstar mailing list> ARM-allstar at hamvoip.org> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org>_______________________________________________ARM-allstar mailing listARM-allstar at hamvoip.orghttp://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstarVisit the BBB and RPi2/3/4 web page - http://hamvoip.org