[arm-allstar] FW: HF control

[Doug Crompton]

Les,

 Do you need to toggle the keying? Is this just monitor mode or are you
also Transmitting audio on HF?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Wed, Mar 4, 2020 at 3:53 PM "Les Bradshaw via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Doug ,
>         Please see info below, I have another question is it possible
> after connecting node (1) to node (2) to be able to send a DTMF tone from
> node (1) to node (2) that will toggle the simpleusb (K) (COS Keyed )
> command ?
> Thanks,
> Les
> N5LMB
>
> Sent from Mail for Windows 10
>
> From: Les Bradshaw
> Sent: Wednesday, March 4, 2020 9:46 AM
> To: arm-allstar at hamvoip.org
> Subject: Re: [arm-allstar] HF control
>
> I am working on setting up two nodes so I can connect to my HF rig Remote,
> node (1) is radio-less set at duplex=0. Node (2) HF Node is set duplex=0,
> All works well after I boot them up and connect Node (1) to Node (2) then I
> have to go to simpleusb on Node(2) and set setting (K) to Keyed to get
> audio from the HF Node (2) to Radio-less node (1)  then all works well then
> have to key Node(1) to reset time when audio drops out witch is no problem.
> My Question is how can I set Node (2) HF node to COS Keyed after I connect
> to it without having to go to simpleusb or is there a better way to set
> this up ?
> Thanks,
> Les
> N5LMB
>
>
> Sent from Mail for Windows 10
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org