[arm-allstar] VXR7000 Help (Doug Crompton)

[Doug Crompton]

Ok, So it looks like COS is working. You need to set it so it shows KEYED
with RX and CLEAR otherwise.

I think the next thing you need to do is determine if you actually have
audio coming from the repeater to the FOB. You could use an audio amplifier
or a scope to see. Then you can determine if the problem is the repeater or
the FOB. You should be feeding audio to the FOB on pin 21 - mic in.  This
is effected by the item B boost command and item 2 level.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, Jun 21, 2020 at 4:21 PM "Landon Jensen via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I’m pretty sure I am replying to this email thread incorrectly so I
> apologize in advance! Just confused on how to correctly.
>
> Back to the main thread question!
>
> We set that in menu option J to USB and USBINVERT to test both, I can see
> in option V when the radio is keyed it shows keyed on the screen but still
> will not pass audio through it
>
> On Sat, Jun 20, 2020 at 09:00 <arm-allstar-request at hamvoip.org> wrote:..."
>
> >
> >
> > Today's Topics:
> >
> >    1. Re: Is port forwarding required? (dbachman)
> >    2. Re: Is port forwarding required? (dbachman)
> >    3. Re: Is port forwarding required? (Doug Crompton)
> >    4. VXR7000 Help (Landon Jensen)
> >    5. Re: VXR7000 Help (Doug Crompto
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Fri, 19 Jun 2020 20:36:17 -0700
> > From: Landon Jensen <ljensen034m at gmail.com>
> > To: arm-allstar at hamvoip.org
> > Subject: [arm-allstar] VXR7000 Help
> > Message-ID: <34C1C37F-6DC4-4767-B798-FEE42CDF30C4 at gmail.com>
> > Content-Type: text/plain; charset=us-ascii
> >
> > Hi everyone!
> >
> > We are using the following setup:
> > -Vertex VX7000 Repeater
> > -DMK URI
> > -Raspberry Pi 3B+
> > All settings and nodes are set up correctly as far as we can tell.
> However
> > when trying to key the repeater from a portable radio, the repeater shows
> > receiving and after unkeying, the URI will send out the successfully only
> > send the Roger tone over the air. So basically the system is not
> processing
> > the received audio.
> >
> >
> > Sent from my iPad
> >
> > ------------------------------
> >
> > Message: 5
> > Date: Sat, 20 Jun 2020 00:44:18 -0400
> > From: Doug Crompton <wa3dsp at gmail.com>
> > To: ARM Allstar <arm-allstar at hamvoip.org>
> > Subject: Re: [arm-allstar] VXR7000 Help
> > Message-ID:
> >         <CAMp6vss4bCnLjQzQ=
> > Fodh_qh4HUw4YsH0959d7Pf4Y4unJqwRw at mail.gmail.com>
> > Content-Type: text/plain; charset="UTF-8"
> >
> > Don't know if it will help but a quick google search sent me here -
> >
> >
> >
> https://community.allstarlink.org/t/interfacing-with-vx7000-yaesu-repeater/9335
> >
> > In order to process RX audio COS must be active - either high (usb) or
> low
> > (usbinvert) at pin 8 of the DMK URI - This is set in item J of
> > simpleusb-tune-menu  and can be seen in the V (view) option as COS INPUT.
> > It will show KEYED if active or CLEAR if not.I
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Fri, Jun 19, 2020 at 11:45 PM "Landon Jensen via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Hi everyone!
> > >
> > > We are using the following setup:
> > > -Vertex VX7000 Repeater
> > > -DMK URI
> > > -Raspberry Pi 3B+
> > > All settings and nodes are set up correctly as far as we can tell.
> > However
> > > when trying to key the repeater from a portable radio, the repeater
> shows
> > > receiving and after unkeying, the URI will send out the successfully
> only
> > > send the Roger tone over the air. So basically the system is not
> > processing
> > > the received audio.
> > >
> > >
> > > Sent from my iPad
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> >
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> >
> > ------------------------------
> >
> > End of ARM-allstar Digest, Vol 73, Issue 31
> > *******************************************
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org