[arm-allstar] VXR7000 Help (Doug Crompton)

[Landon Jensen]

I’m pretty sure I am replying to this email thread incorrectly so I
apologize in advance! Just confused on how to correctly.

Back to the main thread question!

We set that in menu option J to USB and USBINVERT to test both, I can see
in option V when the radio is keyed it shows keyed on the screen but still
will not pass audio through it

On Sat, Jun 20, 2020 at 09:00 <arm-allstar-request at hamvoip.org> wrote:..."

>
>
> Today's Topics:
>
>    1. Re: Is port forwarding required? (dbachman)
>    2. Re: Is port forwarding required? (dbachman)
>    3. Re: Is port forwarding required? (Doug Crompton)
>    4. VXR7000 Help (Landon Jensen)
>    5. Re: VXR7000 Help (Doug Crompto
>
> ------------------------------
>
> Message: 4
> Date: Fri, 19 Jun 2020 20:36:17 -0700
> From: Landon Jensen <ljensen034m at gmail.com>
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] VXR7000 Help
> Message-ID: <34C1C37F-6DC4-4767-B798-FEE42CDF30C4 at gmail.com>
> Content-Type: text/plain; charset=us-ascii
>
> Hi everyone!
>
> We are using the following setup:
> -Vertex VX7000 Repeater
> -DMK URI
> -Raspberry Pi 3B+
> All settings and nodes are set up correctly as far as we can tell. However
> when trying to key the repeater from a portable radio, the repeater shows
> receiving and after unkeying, the URI will send out the successfully only
> send the Roger tone over the air. So basically the system is not processing
> the received audio.
>
>
> Sent from my iPad
>
> ------------------------------
>
> Message: 5
> Date: Sat, 20 Jun 2020 00:44:18 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] VXR7000 Help
> Message-ID:
>         <CAMp6vss4bCnLjQzQ=
> Fodh_qh4HUw4YsH0959d7Pf4Y4unJqwRw at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Don't know if it will help but a quick google search sent me here -
>
>
> https://community.allstarlink.org/t/interfacing-with-vx7000-yaesu-repeater/9335
>
> In order to process RX audio COS must be active - either high (usb) or low
> (usbinvert) at pin 8 of the DMK URI - This is set in item J of
> simpleusb-tune-menu  and can be seen in the V (view) option as COS INPUT.
> It will show KEYED if active or CLEAR if not.I
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Fri, Jun 19, 2020 at 11:45 PM "Landon Jensen via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Hi everyone!
> >
> > We are using the following setup:
> > -Vertex VX7000 Repeater
> > -DMK URI
> > -Raspberry Pi 3B+
> > All settings and nodes are set up correctly as far as we can tell.
> However
> > when trying to key the repeater from a portable radio, the repeater shows
> > receiving and after unkeying, the URI will send out the successfully only
> > send the Roger tone over the air. So basically the system is not
> processing
> > the received audio.
> >
> >
> > Sent from my iPad
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>
> ------------------------------
>
> End of ARM-allstar Digest, Vol 73, Issue 31
> *******************************************
>