[arm-allstar] not connecting to certain nodes - node table database file

[David McGough]

Here is more debug info, for your testing. In you local rpt.conf node 
stanza,  [51046], make sure you have the parameter: telemdefault=1
That will turn on all telemetry announcements.  Then, from the Asterisk 
CLI, try connecting.  Here is an example where I'm trying to connect to 
2585. My node isn't in the downloaded ASL rpt nodelist, so, it fails to 
connect:

nanopiair*CLI> rpt fun 68010 *32585
    -- Call accepted by 198.211.100.73 (format ulaw)
    -- Format for call is ulaw
    -- Hungup 'IAX2/198.211.100.73:4569-229'
    -- Hungup 'DAHDI/pseudo-712556537'
    -- Hungup 'DAHDI/pseudo-538591689'
    -- <DAHDI/pseudo-280698474> Playing 'rpt/node' (language 'en')
    -- <DAHDI/pseudo-280698474> Playing 'digits/2' (language 'en')
    -- <DAHDI/pseudo-280698474> Playing 'digits/5' (language 'en')
    -- <DAHDI/pseudo-280698474> Playing 'digits/8' (language 'en')
    -- <DAHDI/pseudo-280698474> Playing 'digits/5' (language 'en')
    -- <DAHDI/pseudo-280698474> Playing 'rpt/connection_failed' (language 'en')
    -- Hungup 'DAHDI/pseudo-280698474'


Notice that the call was initially accepted by 2585 (Call accepted by 
198.211.100.73) and then dropped, due to authentication failure.



73, David KB4FXC