[arm-allstar] New to Allstar. Problem connecting to certain nodes

[Doug Crompton]

Karl,

  Good to hear your registration is OK.  The problem with 2135 is obviously
at their end. We are working with them to hopefully fix that problem but
your way of finding an alternate connect basically solves the problem for
now.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sat, Jun 6, 2020 at 1:54 PM "Karl F. Krueger via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Thanks for everyone's help. Doug, I added the hamvoip registration
> command you sent me as instructed. Running the script check_reg.sh
> verifies that I am registered at both hamvoip and ASL.
>
> The node has been running version 1.6-11 on a Pi 3A+ well now for about
> a week, I still can not connect to 2135. However, I can connect to
> 27672 which is the 441.700 repeater on the same network. I am not sure
> if that is ok to do, but it does work. I have no problem connecting to
> 29014.
>
> The Baofeng 888 with the finals removed has plenty of power for a home
> node. It is full scale everywhere in the house and draws only 100mA @
> 4V transmitting. Running a solid ground between the radio and the Pi
> eliminated any hum.
>
> Thanks again and 73,
> Karl
> KB2FA
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>