[arm-allstar] Tx/Rx Timeout Revisited

[Tony]

Thanks Steve, apparently the 3 minute Tx tot failed (?) on the ID-51 as 
I didn't hear any of the warning beeps, and the default 5 minute tot in 
hamvoip's rpt.conf and my beating my gums together caused the problem:

# grep "^rx_timeout" /etc/asterisk/rpt.conf
rx_timeout=300000
rx_timeout=300000

This has been remedied to 2 min 59 sec. with:

# sed -i 's|rx_timeout=300000|rx_timeout=179000|g' 
/etc/asterisk/rpt.conf && astres.sh
# grep "^rx_timeout" /etc/asterisk/rpt.conf
rx_timeout=179000
rx_timeout=179000

On 6/2/20 9:57 PM, "Steve Agee via ARM-allstar" wrote:
> *Tony,
>
> I'm not sure who would have told you that. I'm a control operator and 
> a Board Member of that system, and the shortest timeout I'm aware of 
> is 3 minutes even.
>
> Thanks,
> N5ZUA
> *
> On 6/2/2020 10:21 PM, "Tony via ARM-allstar" wrote:
>> Greetings David,
>>
>> May I be involved with the testing please? My Icom ID-51 has Tx 
>> timeouts of 1,3,5 mins. etc., but I could very much use finer 
>> granularity with an Rx timeout. I was informed by a CO yesterday that 
>> my 180 sec. TOT exceeded that of several ASL 2560 linked repeaters.
>>
>>     Tony  W7EFS
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org