[arm-allstar] Enabling port 4569?

[Adam MacLeod]

Hello Chris,
I have read the entire thread, and I find your situation very peculiar.
>From what I understand, you have everything configured correctly, and
yet, it obviously is still not working.
I am willing to work with you off-list, and perhaps in a FaceTime or
other voice mode call to discuss and test this with you.

My email is va3aum at rac.ca.

Best Regards,
Adam
VA3AUM


On 7/29/20, "Chris Smart via ARM-allstar" <arm-allstar at hamvoip.org> wrote:
>
> On 2020-07-29 11:36 a.m., "Tony via ARM-allstar" wrote:
>> On 7/29/20 7:16 AM, "Chris Smart via ARM-allstar" wrote:
>>> On 2020-07-29 1:22 a.m., "Tony via ARM-allstar" wrote:
>>>> You need to forward the port through your router to the LAN IP
>>>> address. https://portforward.com/arris/ is helpful.
>>> LAN IP address?
>>> Meaning what, the address my router gives my Shari node?
>>> 192.168.0.24
>>> or something else?
>>
>> The LAN (local area network) IP address was stated as "192.168.0.24".
>> If you want to enable other nodes to connect to yours, then you'll
>> need to forward UDP port 4569 through the Arris router to that IP
>> address. The link provided above will help you understand what's
>> required.
>>
> Which I did before posting my initial question last night.
>
> I set that port forward up, attempted to have someone connect to me,
> then posted here when it did not work.
>
> The problem lies elsewhere it seems...
>
> Please look at the whole thread. Thanks.
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>


-- 

Best Regards,
Adam MacLeod