[arm-allstar] hamvoip as a repeater controller

[kg5rdf]

Jed,Today I connected a Hamvoip to a TKR-850 as the controller. The 750 is the same. Load a blank configuration into the repeater. Use pin 25 for COS. Its programmable with in the software active high and low. I tested it with an URI and a modified sound fob. If you want more information on interconnect, send me a private email and I can send pictures of the hookup/wiring diagram. Standard Hamvoip configuration of duplex 2.After I align it tomorrow with a NanoVNA, I will post the complete process on my web page.David KG5RDFSent from my T-Mobile 4G LTE Device
-------- Original message --------From: Jed Barton via ARM-allstar <arm-allstar at hamvoip.org> Date: 1/24/20  7:19 PM  (GMT-06:00) To: arm-allstar at hamvoip.org Cc: Jed Barton <jed at jedbarton.com> Subject: [arm-allstar] hamvoip as a repeater controller Hey guys, Hope everyone is doing well.  OK, so i have a kenwood repeater.  It'sthe tkr850.  At my site, i wanna have the hamvoip software run as arepeater controller and an allstar node.  I'm assuming that can bedone.What would i need to configure in hamvoip?  I'm assuming you can dothings with courtesy tones and all that?My plan is to plug the pi into the Kenwood repeater and have it do both.Any thoughts?Cheers,Jed_______________________________________________ARM-allstar mailing listARM-allstar at hamvoip.orghttp://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstarVisit the BBB and RPi2/3/4 web page - http://hamvoip.org