[arm-allstar] iaxrpt connects, but then drops immediately.

Thu Jan 16 20:31:55 EST 2020

unsure this will work as a reply, but here is my extensions.conf file:

; WARNING - THIS FILE WAS AUTOMATICALLY CONFIGURED FROM A
; TEMPLATE FILE IN   /usr/local/etc/asterisk_tpl   BY THE
; NODE-CONFIG.SH SCRIPT.
;
; EACH TIME THIS SCRIPT IS RUN, THIS FILE WILL BE OVERWRITTEN.
; IF YOU CHANGE ANYTHING IN THIS FILE AND RUN THE NODE-CONFIG.SH
; SCRIPT, IT WILL BE LOST.
;
; IF YOU INTEND TO USE THE NODE-CONFIG.SH SCRIPT,  THEN YOU SHOULD
; MAKE MODIFICATIONS TO THE ACTUAL TEMPLATE FILES LOCATED IN
; /usr/local/etc/asterisk_tpl directory.
;
; Shown for two nodes, second node commented out.
; change ALL 47727 and 1999 (if second node used) to
; your local node numbers

; Updated 1/2019 to include additional features
; Before attempting to add features ensure they
; are not already installed

[general]

static=yes       ; These two lines prevent the command-line interface
writeprotect=yes ; from overwriting the config file. Leave them here.

[globals]
HOMENPA=215

[default]
exten => i,1,Hangup

[radio-secure]
exten => 47727,1,rpt,47727
exten => 1999,1,rpt,1999

[radio-secure-proxy]
exten => 47727,1,rpt,47727|X
exten => _0X.,1,Goto(allstar-sys|${EXTEN:1}|1)

; IAXRPT Windows

[radio-iaxrpt]
exten=47727,1,Rpt,47727|X
exten=1999,1,Rpt,1999|X

; The following stanza is to be used for Android/Iphone
; connections. Please configure the node number for the
; node on this server you want to connect to.
; The callerID name is configured and returned from
; your phone. It is typically your call.

[phone-iaxrpt]    ;;; Stanza is the context from iax.conf
exten => 47727,1,Answer
exten => 47727,n,Playback,rpt/node
exten => 47727,n,Playback,digits/1
exten => 47727,n,Playback,digits/9
exten => 47727,n,Playback,digits/9
exten => 47727,n,Playback,digits/8
exten => 47727,n,Set(CALLERID(num)=0)
exten => 47727,n,Rpt,1998|P|${CALLERID(name)} ;;; The "CallerID" from IAXRpt

; To make this have a static callerID name if your phone
; app does not support callerID change the last line to this
; and specify the name (usually CALL) in place of static-name.

;exten => 47727,n,Rpt,1998|P|"static-name"

; Autopatch example lines. Must be configured and
; SIP or IAX phone connections configured to work.

[pstn-out]
exten=_NXXNXXXXXX,1,playback(ss-noservice)
exten=_NXXNXXXXXX,2,Congestion

[invalidnum]
exten=s,1,Wait,3
exten=s,n,Playback,ss-noservice
exten=s,n,Wait,1
exten=s,n,Hangup

[radio]
exten=_X11,1,Goto(check_route|${EXTEN}|1);
exten=_NXXXXXX,1,Goto(check_route|1${HOMENPA}${EXTEN}|1)
exten=_1XXXXXXXXXX,1,Goto(check_route|${EXTEN}|1)

[check_route]
; no 800
exten=_1800NXXXXXX,2,Goto(invalidnum|s|1)
exten=_1888NXXXXXX,2,Goto(invalidnum|s|1)
exten=_1877NXXXXXX,2,Goto(invalidnum|s|1)
exten=_1866NXXXXXX,2,Goto(invalidnum|s|1)
exten=_1855NXXXXXX,2,Goto(invalidnum|s|1)
; no X00 NPA
exten=_1X00XXXXXXX,2,Goto(invalidnum|s|1)
; no X11 NPA
exten=_1X11XXXXXXX,2,Goto(invalidnum|s|1)
; no X11
exten=_X11,2,Goto(invalidnum|s|1)
; no 555 Prefix in any NPA
exten=_1NXX555XXXX,2,Goto(invalidnum|s|1)
; no 976 Prefix in any NPA
exten=_1NXX976XXXX,2,Goto(invalidnum|s|1)
; no NPA=809
exten=_1809XXXXXXX,2,Goto(invalidnum|s|1)
; no NPA=900
exten=_1900XXXXXXX,2,Goto(invalidnum|s|1)

; okay, route it
exten=_1NXXXXXXXXX,1,Goto(pstn-out|${EXTEN:1}|1)
exten=_X.,2,Goto(invalidnum|s|1)

; End autopatch example

; Following stanza required for web transceiver access

[allstar-public]

exten => s,1,Ringing
exten => s,n,Set(RESP=${CURL(
https://register.allstarlink.org/cgi-bin/authwebphone.pl?${CALLERID(name)})
})
exten => s,n,Set(NODENUM=${CALLERID(number)})
exten => s,n,GotoIf($["${RESP:0:1}" = "?"]?hangit)
exten => s,n,GotoIf($["${RESP:0:1}" = ""]?hangit)
exten => s,n,GotoIf($["${RESP:0:5}" != "OHYES"]?hangit)
exten => s,n,Set(CALLSIGN=${RESP:5})
exten => s,n,Wait(3)
exten => s,n,Playback(rpt/node|noanswer)
exten => s,n,Saydigits(${NODENUM})
exten => s,n,Set(CALLERID(num)=0)
exten => s,n,Set(CALLERID(name)=${CALLSIGN})
exten => s,n,Rpt(${NODENUM}|X)
exten => s,n,Hangup
exten => s,n(hangit),Answer
exten => s,n(hangit),Wait(1)
exten => s,n(hangit),Hangup

exten => 9999,1,Goto(allstar-public|s|1)

; end web transceiver stanza

; Following stanza required for phone access

[allstar-sys]

exten => _x.,1,Ringing
exten => _x.,n,Wait(3)
exten => _x.,n,Answer
exten => _x.,n,Playback(rpt/node)
exten => _x.,n,Saydigits(${EXTEN:1})
exten => _x.,n,Rpt(${EXTEN:1}|P|${CALLERID(name)}-P)
exten => _x.,n,Hangup

; end phone access stanza

; The blacklist and whitelist stanzas below are used to allow or ban nodes
; from connecting. Only one can be selected at a time as defined in the
; [radio] stanza of iax.conf
;
; The best way to allow or ban nodes from the database is to
; use the Supermon application or the node-ban-allow.sh script.
;
; No changes need to be made to these stanzas. See comments in iax.conf.

[blacklist]
exten => _XXXX!,1,NoOp(${CALLERID(num)})
exten =>
_XXXX!,n,GotoIf($[${DB_EXISTS(blacklist/${CALLERID(num)})}]?blocked)
exten => _XXXX!,n,Goto(radio-secure,${EXTEN},1)
exten => _XXXX!,n(blocked),Hangup

[whitelist]
exten => _XXXX!,1,NoOp(${CALLERID(num)})
exten => _XXXX!,n,NoOp(${IAXPEER(CURRENTCHANNEL)})
exten => _XXXX!,n,GotoIf($["${IAXPEER(CURRENTCHANNEL)}" =
"127.0.0.1"]?radio-secure,${EXTEN},1)  ;permit local IPs
exten =>
_XXXX!,n,GotoIf($[${DB_EXISTS(whitelist/${CALLERID(num)})}]?radio-secure,${EXTEN},1)
exten => _XXXX!,n,Hangup

; Stanza to get node number and pass to saydns.sh script in rpt.conf
[saydns]
exten => _xxx.,1,System(/usr/local/sbin/saydns.sh ${EXTEN})
exten => _xxx.,n,Hangup()

; Example connection to another Asterisk server
; and passing an extension

; [pbx_server]
;exten => _1NXXNXXXXXX,1,Dial(IAX2/pbx/${EXTEN})
;exten => _NXXNXXXXXX,1,Dial(IAX2/pbx/${EXTEN})
;exten => _NXX,1,Dial(IAX2/pbx/${EXTEN})
;exten => _NX,1,Dial(IAX2/pbx/${EXTEN})

#includeifexists custom/extensions.conf

On Thu, Jan 16, 2020 at 6:58 AM Matt Rhoades <ki7uef at gmail.com> wrote:

> I'm having troubles with iaxrpt; I can connect, but only for 3 seconds,
> upon connecting I immediately hear "node 1-9-9-8" then the connection is
> immediately terminated.  I've included my iax.conf file below.
>
> Does anyone see my issue?
>
>
>
>
>
>
>
> ; WARNING - THIS FILE WAS AUTOMATICALLY CONFIGURED FROM A
> ; TEMPLATE FILE IN   /usr/local/etc/asterisk_tpl   BY THE
> ; NODE-CONFIG.SH SCRIPT.
> ;
> ; EACH TIME THIS SCRIPT IS RUN, THIS FILE WILL BE OVERWRITTEN.
> ; IF YOU CHANGE ANYTHING IN THIS FILE AND RUN THE NODE-CONFIG.SH
> ; SCRIPT, IT WILL BE LOST.
> ;
> ; IF YOU INTEND TO USE THE NODE-CONFIG.SH SCRIPT,  THEN YOU SHOULD
> ; MAKE MODIFICATIONS TO THE ACTUAL TEMPLATE FILES LOCATED IN
> ; /usr/local/etc/asterisk_tpl directory.
> ;
> ; Inter-Asterisk eXchange driver definition
> ;
> ; For manual configuration edit the registration lines
> ; below and also passwords for various connections.
>
> ; Updated 1/2019 to include additional features
> ; Before attempting to add features ensure they
> ; are not already installed
>
> ; THIS IS AN IMPORTANT FILE! EDIT CAREFULLY!
> ; MAKE A BACKUP BEFORE EDITING
>
> [general]
> bindport=4569
> bindaddr=0.0.0.0
> disallow=all
> allow=g726aal2
> allow=ilbc
> allow=ulaw
> allow=gsm
> ; Hamvoip additional codecs - uncomment as needed
> ;allow=g729
> ;allow=adpcm
> ;allow=g722
> ;allow=codec2
> ;
> jitterbuffer=yes
> forcejitterbuffer=yes
> dropcount=2
> maxjitterbuffer=4000
> maxjitterinterps=10
> resyncthreshold=1000
> maxexcessbuffer=80
> minexcessbuffer=10
> jittershrinkrate=1
> tos=0x1E
> autokill=yes
> delayreject=yes
> ;iaxthreadcount=30
> ;iaxmaxthreadcount=150
>
> ; Uncomment one or both of the following lines and add
> ; your node number in place of xxxxx
> ; and your node password in place of yyyyyy
>
> ; Include hamvoip registration
> #includeifexists iax-hamvoip.conf
>
> register => 47727:***edited to hide my password, but it is correct****@
> register.allstarlink.org
> ;register => xxxxx:yyyyyy at register.allstarlink.org
>
> [radio-proxy]
> type=user
> ;deny=0.0.0.0/0.0.0.0
> ;permit=0.0.0.0/255.255.255.255
> context=radio-secure-proxy
> disallow=all
> allow=g726aal2
> allow=ilbc
> allow=ulaw
> allow=gsm
> ; Hamvoip additional codecs - uncomment as needed
> ;allow=g729
> ;allow=adpcm
> ;allow=g722
> ;allow=codec2
> ;
> transfer=no
>
> [radio-proxy-out]
> type=peer
> host=
> ; add your node number as username
> username=47727
> ; add your node password as secret
> secret=***edited to hide my password, but it is correct****
> auth=md5
> disallow=all
> allow=g726aal2
> allow=ilbc
> allow=ulaw
> allow=gsm
> ; Hamvoip additional codecs
> ;allow=g729
> ;allow=adpcm
> ;allow=g722
> ;allow=codec2
> ;
> transfer=no
>
> ; IAXRPT Example - THis stanza is used for Windows IAXRPT
>
> [iaxrpt]
> user=iaxrpt
> type=user
> context=radio-iaxrpt
> auth=md5
> ; add a password of your selection for secret
> secret=***edited to hide my password, but it is correct****  ; PASSWORD
> host=dynamic
> disallow=all
> allow=ulaw
> allow=gsm
> transfer=no
>
> ; Example for Android/Iphone Zoiper/IAXRPT phone connections
> ; Commented lines below must be configured to your settings
> ; See the iax-rpt or zioper howto at hamvoip.org
>
> [iaxrpt]   ; The stanza is the Username from the phone app
> type=friend
> context=phone-iaxrpt
> host=dynamic
> auth=md5
> secret=***edited to hide my password, but it is correct****s   ; PASSWORD
> disallow=all
> allow=ulaw
> transfer=no
> calltokenoptional=0.0.0.0/0.0.0.0
> requirecalltoken=no
>
> ; [pbx]
> ;type=friend
> ;username=pbx
> ;host=192.168.0.2
> ;;auth=md5
> ;secret=wa3dsp23
> ;context=default
>
>
> ; Incoming radios needed connections
>
> [radio]
> type=user
> disallow=all
> allow=g726aal2
> allow=ilbc
> allow=ulaw
> allow=gsm
> ; Hamvoip additional codecs - uncomment as needed
> ;allow=g729
> ;allow=adpcm
> ;allow=g722
> ;allow=codec2
> ;
> codecpriority=host
> ;
> ; To use the ban/allow (blacklist/whitelist) feature
> ; comment with a ';' the context = radio-secure line and
> ; remove the ';' from either the context = whitelist or
> ; context = blacklist line. ONLY ONE of the three lines
> ; can be active (uncommented).
> ;
> ; The best way to allow or ban nodes from the database is to
> ; use the Supermon application or the node-ban-allow.sh script.
>
> context = radio-secure
> ;context = whitelist
> ;context = blacklist
> ;
> transfer=no
>
> ; Incoming phone connections to app_rpt
>
> ;[radio-control]
> ;type=user
> ;secret=nunya
> ;disallow=all
> ;allow=gsm
> ;allow=ilbc
> ;allow=ulaw
> ;allow=gsm
> ; Hamvoip additional codecs - uncomment as needed
> ;allow=g729
> ;allow=adpcm
> ;allow=g722
> ;allow=codec2
> ;
> ;codecpriority=host
> ;context=radio-control
> ;transfer=no
>
> ; For Allstar Phone access
> [allstar-sys]
> type=user
> context=allstar-sys
> auth=rsa
> inkeys=allstar
> disallow=all
> allow=ulaw
>
> ; For Allstar web page access
> [allstar-public]
> type=user
> context=allstar-public
> auth=md5
> secret=allstar
> disallow=all
> allow=ulaw
> allow=gsm
>
> ; Setup for outgoing calls
>
> ;[yourprovider] ; This needs to change
> ;type=peer
> ;host=127.0.0.1
> ;secret=nunya
> ;auth=md5
> ;disallow=all
> ;allow=gsm
> ;transfer=no
>
> #includeifexists custom/iax.conf
>