[arm-allstar] New IRLP install

[Doug Crompton]

Eric,

 As Dave pointed out you run nothing manually except what is stated in the
howto. I updated the howto at hamvoip.org which hopefully makes this clear.
Do what the install instructions say and reboot and you should be good to
go. If you have already run things you should not then you may need to
start over.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Wed, Jan 1, 2020 at 4:59 PM "Eric Harrison via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> After hearing problem with and IRLP intalls i decided to Try a new IRLP
> install, (IRLP 3905 installed on  Allstar node  42285. I already have one
> allstar node, 28302  working with IRLP3917 that was install about a year
> ago.
>
> After the New install, i ran the enable script /home/irlp/scripts/enable
> and got errors that point to symbolic links in /home/irlp directory that
> point to  /var/log/irlp which do not exist, and were never created by the
> install.
>
> These files all exist on my Allstar node 28302  (IRLP 3917).
>
> The new install is missing the directory /var/log/irlp and all its files.
> Not sure why this was never created in this new install. Even a second
> attempt did not resolve the issue.
>
> Eric
>
> N7JYS
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>