[arm-allstar] cdm1250 and hamvoip question

[David McGough]

So, only the CDM1250 get cycled, fixing the issue? The HamVoIP RPi does
NOT get cycled at the same time?  If this is the scenario, I suspect some
type of intermittant problem in the CDM1250.

Does the CDM1250 still receive when this problem happens? Are any of the 
front panel buttons functional while this problem happens (i.e.: has the 
radio "locked up.")?


73, David KB4FXC


On Wed, 12 Feb 2020, "Jed Barton via ARM-allstar" wrote:

> Hey guys,
> 
> OK, interesting issue that i'd like some input on.
> So we're running an allstar node with hamvoip of course.  We have a
> cdm1250 hooked up to it. This has happened several times, where for
> some reason, the radio just stops transmitting.
> When my friend got to the site with the node radio, the radio was
> powered on as normal.  He power cycled the node radio, and then it
> started working again.  This has happened several times.  It almost
> seems like the node radio is getting thrown in to orbit or something,
> cause it'll transmit for a long time perfectly, then just quit, and
> all it needs is a power cycle.
> Any thoughts or ideas, anyone seen this?
> 
> Cheers,
> 
> Jed
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>