[arm-allstar] Voting

[Aaron Groover]

Thank you! I knew it had to be allmon.ini. You guys are the best! Also this project with simulcasting was MUCH more than i expected. Work wise. 



--
 
Thank You,
 
Aaron Groover
(610) 379 6148
K3ALG at outlook.com
 
The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.

**This message has been composed on a mobile application. Please excuse any grammatical errors**

> On Dec 7, 2020, at 16:51, Lee Woldanski <ve7fet at tparc.org> wrote:
> 
> 
> Hi Aaron,
> 
> Make sure your rpt.conf context uses your node number in both the context name, and the channel driver:
> [400000]        ; Change this to your assigned node number
> 
> ; CHANNEL DRIVER SETTINGS
> rxchannel=voter/400000          ; We're using the VOTER channel driver
> ...
> 
> 
> Make sure in voter.conf, that you are calling the same named context:
> [general]
> port = 667                      ;
> buflen = 120
> 
> [400000]
> ...
> 
> 
> In allmon.ini in /srv/http/supermon, add an entry for the voting system:
> 
> [VHF VOTER System]
> rtcmnode=400000
> menu=yes
> 
> 
> If you don't use a node number (you used a "friendly name") for the contexts for the voter, it won't work. Been there, done that, got the t-shirt.
> 
> 
> Lee
> 
>> On Mon, Dec 7, 2020 at 9:38 AM "Aaron Groover via ARM-allstar" <arm-allstar at hamvoip.org> wrote:
>> Morning, well afternoon now. So this weekend we ended up finishing  our simulcast project and followed every direction known to man for this system. Everything is working just fine EXCEPT the RSSI dashboard. I have the proper files what it called for. And still won’t load onto allmon or even supermon. So I’m using the first generation of allmon and it works. Any ideas?
>> 
>> 
>> 
>> 
>> --
>> 
>> 
>> 
>> Thank You,
>> 
>> 
>> 
>> Aaron Groover
>> 
>> (610) 379 6148<tel:(610)%20379%206148>
>> 
>> K3ALG at outlook.com<mailto:K3ALG at outlook.com>
>> 
>> 
>> 
>> The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.
>> 
>> **This message has been composed on a mobile application. Please excuse any grammatical errors**
>> _______________________________________________
>> 
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> 
> 
> -- 
> Lee Woldanski, AScT
> VE7FET