[arm-allstar] Morse Code ID Seems Stuck at 20 WPM

[Mike - W5JR]

Obviously your callsign wasn’t in large enough font for the speed readers. 

Along this line, I have hub nodes without RF connected to them, but I connect via an iax client often. No callsign needed, just a hub “ID” so I can remember which one I’m connected to. 

My allstarlink hub nodes are running comfortably at 35 wpm. But the Hamvoip RPi nodes are stuck at 20. However, my antique Hamvoip Beaglebone Black is ripping right along, and at substantially improved quality. When source is compiled with a higher upper Morse speed limit, the element timing improved. Sounds like real Mose. Didn’t investigate why. 


tnx
Mike / W5JR
Alpharetta GA


> On Aug 16, 2020, at 18:57, Adam MacLeod via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Well, the FCC doesn't govern the entire world, but thanks for the answer anyhow.
> 
> 
>> On 8/16/20, "David H. via ARM-allstar" <arm-allstar at hamvoip.org> wrote:
>> 20 wpm is the maximum speed an ID can be sent at per FCC regulations.
>> 
>> On August 16, 2020 4:46:49 PM CDT, "Adam MacLeod via ARM-allstar"
>> <arm-allstar at hamvoip.org> wrote:
>>> Hello All,
>>> I am looking to speed up the morse code ID on my HamVoIP Allstar Node.
>>> However, when I increase the speed parameter beyond 20 in rpt.conf in
>>> the [morse51986] stanza, it does not seem to have any audible effect.
>>> Does anyone have any suggestions on how to speed up the morse ID
>>> beyond its painfully slow speed? When telemetry fires, it slows me
>>> down from keying up, as this is a simplex node.
>>> 
>>> Thanks.
>>> Adam, VA3AUM, Node 51986
>>> _______________________________________________
>>> 
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>> 
>> --
>> Sent from my LG Stylo 5 via the T-mobile network.
>> _______________________________________________
>> 
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>> 
> 
> 
> -- 
> 
> Best Regards,
> Adam MacLeod
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org