[arm-allstar] Question About Connection Announcements

[David McGough]

Chris,

There are (at least) 2 solutions. First, set:

telemdefault=0    ; Turns off all telemetry
telemdefault=2    ; Turns off all telemetry 120 seconds after connect


And / or, you can dynamically turn the telemetry level down:

telemduckdb=-32   ; Turn it WAY down (32dB)!


The "normal" telemetry level is adjusted with:

telemnomdb=-12




73, David K4FXC




On Wed, 5 Aug 2020, "Chris Smart via ARM-allstar" wrote:

> Hi folks.
> 
> 
> After a couple of times controlling the Trans-Canada Allstar net, I've 
> heard from a couple of people who access the net via their local 
> repeaters that they are fed up with all the connect/disconnect 
> announcements.
> 
> 
> "This female voice keeps stomping on everyone."
> 
> 
> Is there something a local repeater owner can change on his/her Allstar 
> node to lessen some of those messages, or shut them up entirely? I'm 
> guessing the repeaters are connecting to the main hub (Node 51730) and 
> hearing all the other messages from the hub.
> 
> 
> Thanks for any suggestions,
> 
> 
> Chris
> 
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>