[arm-allstar] New User with One Basic Problem

[john at qso.com]

>From a Linux prompt:

asterisk -rx "rpt lstats 12345"

Where 12345 is your allstar node number. Include the quotes.
The results will be this:

NODE            PEER                RECONNECTS  DIRECTION  CONNECT TIME        CONNECT STATE
----            ----                ----------  ---------  ------------        -------------
XXXXX           163.25.234.47       1           OUT        00:14:12.5          ESTABLISHED

XXXXX will be the node number you're connected to. 

If you're not connected, the output will be:
NODE            PEER                RECONNECTS  DIRECTION  CONNECT TIME        CONNECT STATE
----            ----                ----------  ---------  ------------        -------------


-----Original Message-----
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Steve Matzura via ARM-allstar"
Sent: Thursday, April 30, 2020 12:32 PM
To: arm-allstar at hamvoip.org
Cc: Steve Matzura <sm at noisynotes.com>
Subject: [arm-allstar] New User with One Basic Problem

I have an Allstarlink server and node number, and a Pi 4B, up to date as of three days ago,  which has been set up to the best of my knowledge. 
It is connected to a Kenwood TM-D700A via a URICables cable and a Techno by George fob. I had the option of purchasing the fob with or without eprom, I chose without. I've gone through everything there is to go through on the Pi, the flash test works with tone, but from all appearances, I am not connected to the Allstarlink server. How can I verify that connection status please?

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org