[arm-allstar] Hamvoip Update 1.6.2-03

Wed Apr 22 18:49:22 EDT 2020

Are you sure the IP address of this node did not change?  Are you pinging
the correct local IP address as shown in the ifconfig screen on the
offending server? Or you can type myip.sh

*73 Doug, WA3DSP*
*http://wa3dsp.org <http://wa3dsp.org>*

On Wed, Apr 22, 2020 at 6:29 PM "Joe Orrico via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Doug,
>
> I just pinged from my local computer on network to it and it failed! I
> pinged my other two nodes on the same network and they worked fine?
>
> Joe
>
> -----Original Message-----
> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Joe
> Orrico via ARM-allstar"
> Sent: Wednesday, April 22, 2020 3:13 PM
> To: 'ARM Allstar' <arm-allstar at hamvoip.org>
> Cc: wb6hro at att.net
> Subject: Re: [arm-allstar] Hamvoip Update 1.6.2-03
>
> Doug,
>
> I pinged ucsd.edu and sent 100 packets and 0% loss. So it works.
>
> I also pinged my computer on the LAN it was OK too.?
>
> Joe
>
> -----Original Message-----
> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
> Crompton via ARM-allstar"
> Sent: Wednesday, April 22, 2020 1:18 PM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] Hamvoip Update 1.6.2-03
>
> At the Linux prompt - ping ucsd.edu    would be one example.
>
> For ssh -    ssh ip-address or domain-name -p port#    -    ssh
> 192.168.1.40 -p 222
>
> *73 Doug, WA3DSP*
> *http://wa3dsp.org <http://wa3dsp.org>*
>
> On Wed, Apr 22, 2020 at 3:52 PM "Joe Orrico via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > What is the command to ping out?
> >
> > Joe Orrico
> > Sent from my iPhone
> >
> > > On Apr 22, 2020, at 12:15, Doug Crompton via ARM-allstar <
> > arm-allstar at hamvoip.org> wrote:
> > >
> > > Can you communicate OUT using ssh to some other system via HDMI?
> > > Can you ping out?
> > >
> > > *73 Doug, WA3DSP*
> > > *http://wa3dsp.org <http://wa3dsp.org>*
> > >
> > >
> > >> On Wed, Apr 22, 2020 at 3:07 PM "Joe Orrico via ARM-allstar" <
> > >> arm-allstar at hamvoip.org> wrote:
> > >>
> > >> Doug,
> > >>
> > >> I've been emailing with David about it. It's a wired connection and
> > >> IP
> > is
> > >> good and shows up on network. Actually it connects with my other
> > >> nodes
> > fine
> > >> also.
> > >>
> > >> I just can't communicate locally on the network anymore. The IP is
> > correct
> > >> in setup and SSH port is good too. I can communicate with Putty and
> > >> Supermon to my other nodes fine.
> > >>
> > >> I just sent David the node number that is 500290. It's connected to
> > other
> > >> nodes.
> > >>
> > >> The only way locally is the HDMI and keyboard. No SSH or HTTP.
> > >>
> > >> It's always something. ☹
> > >>
> > >>
> > >> Joe Orrico
> > >> WB6HRO / WR6AAC Repeater
> > >>
> > >>
> > >>
> > >> -----Original Message-----
> > >> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of
> > >> "Doug Crompton via ARM-allstar"
> > >> Sent: Wednesday, April 22, 2020 11:05 AM
> > >> To: ARM Allstar <arm-allstar at hamvoip.org>
> > >> Cc: Doug Crompton <wa3dsp at gmail.com>
> > >> Subject: Re: [arm-allstar] Hamvoip Update 1.6.2-03
> > >>
> > >> Joe,
> > >>
> > >> ssh and Supermon are two different communications ports so one
> > >> would not have anything to do with the other. Can you ping the IP
> > >> address of this server on your LAN? Is this a static or DHCP
> > >> server?  Is it wired or wireless?  If you have HDMI access you can
> > >> try pinging out. Also do ifconfig at the Linux prompt and see what
> > >> your network settings are. If
> > you
> > >> are using DHCP wired and wireless will have different IP addresses.
> > >>
> > >> *73 Doug, WA3DSP*
> > >> *http://wa3dsp.org <http://wa3dsp.org>*
> > >>
> > >> On Wed, Apr 22, 2020 at 12:17 PM "Joe Orrico via ARM-allstar" <
> > >> arm-allstar at hamvoip.org> wrote:
> > >>
> > >>> Doug,
> > >>>
> > >>> I just did the update at my hub at my house and for some reason I
> > >>> can no longer communicate via SSH with Putty or Supermon.
> > >>>
> > >>> I can still connect to it from other nodes.
> > >>>
> > >>> The IP address and SSH port were verified using HDMI Port, they
> > >>> are correct in setup and in Putty.
> > >>>
> > >>> What am I missing? I hope I don't have to fall on my scope probe!
> > >>> LOL
> > >>>
> > >>>
> > >>> Joe Orrico
> > >>> WB6HRO / WR6AAC Repeater
> > >>>
> > >>>
> > >>>
> > >>> -----Original Message-----
> > >>> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of
> > >>> "Doug Crompton via ARM-allstar"
> > >>> Sent: Tuesday, April 21, 2020 10:25 PM
> > >>> To: ARM Allstar <arm-allstar at hamvoip.org>
> > >>> Cc: Doug Crompton <wa3dsp at gmail.com>
> > >>> Subject: [arm-allstar] Hamvoip Update 1.6.2-03
> > >>>
> > >>> Dave has put out an update tonight for Supermon, Lsnodes, the
> > >>> events system, and some other internal fixes and code clean up.
> > >>>
> > >>> Supermon 6.2 adds a few new features and some visual cleanup. The
> > >>> updated manual is in the howto's at hamvoip.org
> > >>>
> > >>> See the 6.2 addendum at the end of the document. We are working on
> > >>> some efficiency improvements on the AMI code which Supermon uses
> > >>> heavily. On larger hubs with multiple Supermon users the amount of
> > >>> CPU resources it uses is significant. Internally the AMI was not
> > >>> designed for this amount of loading so this update lays the
> > >>> groundwork for the AMI update. A forthcoming update will complete
> > >>> that change. Supermon
> > >>> 6.2 gives you the ability to change the update speed of the
> > >>> display which by default is .5 seconds. It can now be set to as
> > >>> long as 5 seconds if desire to reduce the loading when multiple
> > >>> users are accessing it.
> > >>>
> > >>> Another significant Supermon change is the adding of a second
> > >>> level of security. If setup certain buttons are only available to
> > >>> what we would call a super admin. So presently there are three
> > >>> possible levels - no login sees the connected nodes and their
> > >>> status, Level two see only buttons that would not directly cause
> > >>> system disruption if used inappropriately. Level three see all the
> > >>> button. If level three is not setup which is the default behavior
> > >>> then level two see all the buttons. This is explained in the
> > >>> addendum. You are basically setting up another user/pass in the edit
> directory.
> > >>>
> > >>> lsnodes has changed due to security issues! The frequency of
> > >>> Internet hacking has increased immensely in the last few months
> > >>> and we are always looking at ways to improve the security of the
> Hamvoip code.
> > >>> Unfortunately the command part of lsnodes is not secure therefore
> > >>> we have taken the command mode out of lsnodes. Users should use
> > >>> supermon for command operation. Supermon is part of ALL Hamvoip
> > >>> installations and is easy to setup. Instructions are in the manual
> mentioned above.
> > >>> lsnodes links are in Supermon.
> > >>>
> > >>> An exciting change has been made to the events format allowing
> > >>> global variables to be assigned and used externally. This adds the
> > >>> 'S' set parameter to the event command. Here is an example -
> > >>>
> > >>> [events69000]
> > >>> LINKS0 = G|S|${RPT_NUMALINKS}
> > >>>
> > >>> In this example we are setting a global variable (LINKS0) to the
> > >>> value of the number of direct links connected to node 69000. The G
> > >>> means perform the event on a global, in this case LINKS0, and the
> > >>> S means set it to the value of RPT_NUMALINKS. Events change
> > >>> automatically at every connect/disconnect operation or system event
> change.
> > >>>
> > >>> This completely eliminates the need to have an external script do
> this.
> > >>> This global variable can then be used in the extensions.conf file
> > >>> or elsewhere.
> > >>>
> > >>> Internally thread naming has been added to aid in debugging.
> > >>>
> > >>> Use the admin menu item 1 to update your node. It is important do
> > >>> do updates on a timely basis as code changes add features and
> > >>> enhancements you will not have it you do not update. The complete
> > >>> name of this version is Asterisk
> > >>> 1.4.23-pre.hamvoip-V1.6.2-03-app_rpt-0.327-04/16/2020
> > >>>
> > >>> The next update is scheduled to include an updated ssh and
> > >>> firewall example code to protect ssh ports.
> > >>>
> > >>>
> > >>> *73 Doug, WA3DSP*
> > >>> *http://wa3dsp.org <http://wa3dsp.org>*
> > >>> _______________________________________________
> > >>>
> > >>> ARM-allstar mailing list
> > >>> ARM-allstar at hamvoip.org
> > >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >>>
> > >>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >>>
> > >>> _______________________________________________
> > >>>
> > >>> ARM-allstar mailing list
> > >>> ARM-allstar at hamvoip.org
> > >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >>>
> > >>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >>>
> > >> _______________________________________________
> > >>
> > >> ARM-allstar mailing list
> > >> ARM-allstar at hamvoip.org
> > >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >>
> > >> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >>
> > >> _______________________________________________
> > >>
> > >> ARM-allstar mailing list
> > >> ARM-allstar at hamvoip.org
> > >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >>
> > >> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org