[arm-allstar] Hamvoip Update 1.6.2-03

Wed Apr 22 18:18:11 EDT 2020

Doug,

I just pinged from my local computer on network to it and it failed! I pinged my other two nodes on the same network and they worked fine?

Joe

-----Original Message-----
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Joe Orrico via ARM-allstar"
Sent: Wednesday, April 22, 2020 3:13 PM
To: 'ARM Allstar' <arm-allstar at hamvoip.org>
Cc: wb6hro at att.net
Subject: Re: [arm-allstar] Hamvoip Update 1.6.2-03

Doug,

I pinged ucsd.edu and sent 100 packets and 0% loss. So it works.

I also pinged my computer on the LAN it was OK too.?

Joe

-----Original Message-----
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug Crompton via ARM-allstar"
Sent: Wednesday, April 22, 2020 1:18 PM
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Doug Crompton <wa3dsp at gmail.com>
Subject: Re: [arm-allstar] Hamvoip Update 1.6.2-03

At the Linux prompt - ping ucsd.edu    would be one example.

For ssh -    ssh ip-address or domain-name -p port#    -    ssh
192.168.1.40 -p 222

*73 Doug, WA3DSP*
*http://wa3dsp.org <http://wa3dsp.org>*

On Wed, Apr 22, 2020 at 3:52 PM "Joe Orrico via ARM-allstar" < arm-allstar at hamvoip.org> wrote:

> What is the command to ping out?
>
> Joe Orrico
> Sent from my iPhone
>
> > On Apr 22, 2020, at 12:15, Doug Crompton via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
> >
> > Can you communicate OUT using ssh to some other system via HDMI? 
> > Can you ping out?
> >
> > *73 Doug, WA3DSP*
> > *http://wa3dsp.org <http://wa3dsp.org>*
> >
> >
> >> On Wed, Apr 22, 2020 at 3:07 PM "Joe Orrico via ARM-allstar" < 
> >> arm-allstar at hamvoip.org> wrote:
> >>
> >> Doug,
> >>
> >> I've been emailing with David about it. It's a wired connection and 
> >> IP
> is
> >> good and shows up on network. Actually it connects with my other 
> >> nodes
> fine
> >> also.
> >>
> >> I just can't communicate locally on the network anymore. The IP is
> correct
> >> in setup and SSH port is good too. I can communicate with Putty and 
> >> Supermon to my other nodes fine.
> >>
> >> I just sent David the node number that is 500290. It's connected to
> other
> >> nodes.
> >>
> >> The only way locally is the HDMI and keyboard. No SSH or HTTP.
> >>
> >> It's always something. ☹
> >>
> >>
> >> Joe Orrico
> >> WB6HRO / WR6AAC Repeater
> >>
> >>
> >>
> >> -----Original Message-----
> >> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of 
> >> "Doug Crompton via ARM-allstar"
> >> Sent: Wednesday, April 22, 2020 11:05 AM
> >> To: ARM Allstar <arm-allstar at hamvoip.org>
> >> Cc: Doug Crompton <wa3dsp at gmail.com>
> >> Subject: Re: [arm-allstar] Hamvoip Update 1.6.2-03
> >>
> >> Joe,
> >>
> >> ssh and Supermon are two different communications ports so one 
> >> would not have anything to do with the other. Can you ping the IP 
> >> address of this server on your LAN? Is this a static or DHCP 
> >> server?  Is it wired or wireless?  If you have HDMI access you can 
> >> try pinging out. Also do ifconfig at the Linux prompt and see what 
> >> your network settings are. If
> you
> >> are using DHCP wired and wireless will have different IP addresses.
> >>
> >> *73 Doug, WA3DSP*
> >> *http://wa3dsp.org <http://wa3dsp.org>*
> >>
> >> On Wed, Apr 22, 2020 at 12:17 PM "Joe Orrico via ARM-allstar" < 
> >> arm-allstar at hamvoip.org> wrote:
> >>
> >>> Doug,
> >>>
> >>> I just did the update at my hub at my house and for some reason I 
> >>> can no longer communicate via SSH with Putty or Supermon.
> >>>
> >>> I can still connect to it from other nodes.
> >>>
> >>> The IP address and SSH port were verified using HDMI Port, they 
> >>> are correct in setup and in Putty.
> >>>
> >>> What am I missing? I hope I don't have to fall on my scope probe! 
> >>> LOL
> >>>
> >>>
> >>> Joe Orrico
> >>> WB6HRO / WR6AAC Repeater
> >>>
> >>>
> >>>
> >>> -----Original Message-----
> >>> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of 
> >>> "Doug Crompton via ARM-allstar"
> >>> Sent: Tuesday, April 21, 2020 10:25 PM
> >>> To: ARM Allstar <arm-allstar at hamvoip.org>
> >>> Cc: Doug Crompton <wa3dsp at gmail.com>
> >>> Subject: [arm-allstar] Hamvoip Update 1.6.2-03
> >>>
> >>> Dave has put out an update tonight for Supermon, Lsnodes, the 
> >>> events system, and some other internal fixes and code clean up.
> >>>
> >>> Supermon 6.2 adds a few new features and some visual cleanup. The 
> >>> updated manual is in the howto's at hamvoip.org
> >>>
> >>> See the 6.2 addendum at the end of the document. We are working on 
> >>> some efficiency improvements on the AMI code which Supermon uses 
> >>> heavily. On larger hubs with multiple Supermon users the amount of 
> >>> CPU resources it uses is significant. Internally the AMI was not 
> >>> designed for this amount of loading so this update lays the 
> >>> groundwork for the AMI update. A forthcoming update will complete 
> >>> that change. Supermon
> >>> 6.2 gives you the ability to change the update speed of the 
> >>> display which by default is .5 seconds. It can now be set to as 
> >>> long as 5 seconds if desire to reduce the loading when multiple 
> >>> users are accessing it.
> >>>
> >>> Another significant Supermon change is the adding of a second 
> >>> level of security. If setup certain buttons are only available to 
> >>> what we would call a super admin. So presently there are three 
> >>> possible levels - no login sees the connected nodes and their 
> >>> status, Level two see only buttons that would not directly cause 
> >>> system disruption if used inappropriately. Level three see all the 
> >>> button. If level three is not setup which is the default behavior 
> >>> then level two see all the buttons. This is explained in the 
> >>> addendum. You are basically setting up another user/pass in the edit directory.
> >>>
> >>> lsnodes has changed due to security issues! The frequency of 
> >>> Internet hacking has increased immensely in the last few months 
> >>> and we are always looking at ways to improve the security of the Hamvoip code.
> >>> Unfortunately the command part of lsnodes is not secure therefore 
> >>> we have taken the command mode out of lsnodes. Users should use 
> >>> supermon for command operation. Supermon is part of ALL Hamvoip 
> >>> installations and is easy to setup. Instructions are in the manual mentioned above.
> >>> lsnodes links are in Supermon.
> >>>
> >>> An exciting change has been made to the events format allowing 
> >>> global variables to be assigned and used externally. This adds the 
> >>> 'S' set parameter to the event command. Here is an example -
> >>>
> >>> [events69000]
> >>> LINKS0 = G|S|${RPT_NUMALINKS}
> >>>
> >>> In this example we are setting a global variable (LINKS0) to the 
> >>> value of the number of direct links connected to node 69000. The G 
> >>> means perform the event on a global, in this case LINKS0, and the 
> >>> S means set it to the value of RPT_NUMALINKS. Events change 
> >>> automatically at every connect/disconnect operation or system event change.
> >>>
> >>> This completely eliminates the need to have an external script do this.
> >>> This global variable can then be used in the extensions.conf file 
> >>> or elsewhere.
> >>>
> >>> Internally thread naming has been added to aid in debugging.
> >>>
> >>> Use the admin menu item 1 to update your node. It is important do 
> >>> do updates on a timely basis as code changes add features and 
> >>> enhancements you will not have it you do not update. The complete 
> >>> name of this version is Asterisk
> >>> 1.4.23-pre.hamvoip-V1.6.2-03-app_rpt-0.327-04/16/2020
> >>>
> >>> The next update is scheduled to include an updated ssh and 
> >>> firewall example code to protect ssh ports.
> >>>
> >>>
> >>> *73 Doug, WA3DSP*
> >>> *http://wa3dsp.org <http://wa3dsp.org>* 
> >>> _______________________________________________
> >>>
> >>> ARM-allstar mailing list
> >>> ARM-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >>>
> >>> _______________________________________________
> >>>
> >>> ARM-allstar mailing list
> >>> ARM-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >>>
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >>
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org