[arm-allstar] No RXorTX?

David McGough kb4fxc at inttek.net
Wed Apr 22 03:50:15 EDT 2020


Hi,

Have you checked the COS telemetry coming from the radio (pin 8?) with a
multimeter, confirming that you do have proper signal voltage for active /
inactive?

If the radio COS voltages are correct, what type of audio FOB are you 
using??


73, David KB4FXC


On Tue, 21 Apr 2020, "R I via ARM-allstar" wrote:

> I have tried this on a few GM300s and a CDM1550 with same exact problem.
> I must have a setting somewhere that is incorrect.
> 
> I can connect via my data on cell phone with my pops call on to echolink, 
> transmit on phone onto echolink and hear myself on my repeater via this 
> link radio. If I transmit on my repeater the GM300 red rx light comes on 
> but nothing goes over the air or no sign on anything on Supermon.
> 
> I have the link radio programmed correctly with PL and all because if I add 
> a Mic it works perfectly. When I'm using for link I have the mic jumper in 
> there where the Mon light turns off.
> 
> Pin 8 is set to PL/DPL & CSQ Det LOW but I have also tried HIGH and no good.
> 
> duplex=1
> (currently "usbinvert")
> 
> What am I missing here?
> 
> Raul KB2UET
> 
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> 



More information about the ARM-allstar mailing list