[arm-allstar] Frequency agile remote base

Thu Apr 16 19:26:19 EDT 2020

Sorry. That really was supposed to go off list. 

Buddy Brannan, KB5ELV - Erie, PA
Email: buddy at brannan.name
Mobile: (814) 431-0962

> On Apr 15, 2020, at 10:07 PM, Buddy Brannan via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Howdy,
> 
> Off list,
> 
> So I’m going to inherit one of these with the bad display. Which bothers me exactly zero, since I’m blind and don’t care about the display anyway, and it will have the voice module installed. 
> 
> Is this a GNU/Linux command line program? Sounds good if so. 
> 
> Vy 73,
> 
> 
> Buddy Brannan, KB5ELV - Erie, PA
> Email: buddy at brannan.name
> Mobile: (814) 431-0962
> 
> 
> 
>> On Apr 15, 2020, at 3:47 PM, Steve Smith via ARM-allstar <arm-allstar at hamvoip.org> wrote:
>> 
>> I have two TM-V7A's with bad displays.  Rather than take the HAMLIB approach, I use a program called RCV7 that allows you to do some control of your TM-V7A using your PC and a USB to serial programming cable made for the TM-V7A. I built my own but they are available on ebay.  I just program the TM-V7A for the frequency, CTCSS power level, etc that I want and then turn the radio off and unplug the cable.  The TM-V7A remembers your settings when power is shut off.  I then plug my URI (in my case, that is a DINAH) to use the radio for Allstar.  I have placed a copy of the program in the Files folder of the DINAH group www.groups.io/g/dinah/files <www.groups.io/g/shari/files>.
>> 
>> Steve - N8AR
>> 
>> ------ Original Message ------
>> From: "Jay Urish via ARM-allstar" <arm-allstar at hamvoip.org>
>> To: "David Bufkin via ARM-allstar" <arm-allstar at hamvoip.org>
>> Cc: "Jay Urish" <jay at netwolf.net>
>> Sent: 4/15/2020 2:54:16 PM
>> Subject: Re: [arm-allstar] Frequency agile remote base
>> 
>>> No.. Just use a serial to USB adapter on the same node.
>>> 
>>> 
>>> On 4/15/20 1:48 PM, "David Bufkin via ARM-allstar" wrote:
>>>> Thank y’all for the response. The only reason is because I have a v7a with a faulty display and this would be perfect to get some use out of it. When I make the cable and all that good stuff will I have to basically build another node minus the simplex radio and then connect my current node to it to be able to controll it?
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>>> On Apr 15, 2020, at 1:46 PM, Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org> wrote:
>>>>> 
>>>>> Clarification:  This interface is for the V7A and is NOT needed for the
>>>>> V71A.
>>>>> 
>>>>> *73 Doug, WA3DSP*
>>>>> *http://wa3dsp.org <http://wa3dsp.org>*
>>>>> 
>>>>>> On Wed, Apr 15, 2020 at 2:43 PM Doug Crompton <wa3dsp at gmail.com> wrote:
>>>>>> 
>>>>>> Now I understand what you are talking about. I am attaching the schematic
>>>>>> of the interface which I re-did several years ago. This allows the
>>>>>> connection of both audio and data to the radio you are using. I do not have
>>>>>> this radio nor have I used the interface. You would need to build this
>>>>>> interface.
>>>>>> 
>>>>>> *73 Doug, WA3DSP*
>>>>>> *http://wa3dsp.org <http://wa3dsp.org>*
>>>>>> 
>>>>>> On Wed, Apr 15, 2020 at 2:36 PM "David McGough via ARM-allstar" <
>>>>>> arm-allstar at hamvoip.org> wrote:
>>>>>> 
>>>>>>> Hi David,
>>>>>>> 
>>>>>>> Yes, I've used several different radios with hamlib and it works well.
>>>>>>> 
>>>>>>> I'm sure you realize that the TM-V7A is a 20+ year old radio and aren't
>>>>>>> readily available for acquisition by a new user.  I've got a couple
>>>>>>> TM-G707A
>>>>>>> radios which I use with hamlib, using the adapter interface that Jim
>>>>>>> Dixon
>>>>>>> designed years ago. Here is a link showing info about this interface:
>>>>>>> 
>>>>>>> https://wiki.allstarlink.org/wiki/Cable_Adapter_Card_for_TMG-707A
>>>>>>> 
>>>>>>> The TM-G707A radios are not readily found, either, of course.
>>>>>>> 
>>>>>>> My recommendation would be to be prepared to do some research and
>>>>>>> experimenation....Or, get a currently available radio that has advertised
>>>>>>> support.
>>>>>>> 
>>>>>>> 73, David KB4FXC
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>>> On Wed, 15 Apr 2020, "David Bufkin via ARM-allstar" wrote:
>>>>>>>> I asked here earlier if anyone has used a Kenwood v7a via hamlib
>>>>>>> thatâ€™s on the hamvoip. Has anyone done that with another radio? Just
>>>>>>> trying to get an idea how to do it and how itâ€™s controlled.
>>>>>>> 
>>>>>>> Sent from my iPhone
>>>>>>> _______________________________________________
>>>>>>> 
>>>>>>> ARM-allstar mailing list
>>>>>>> ARM-allstar at hamvoip.org
>>>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>>>> 
>>>>>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> 
>>>>>>> ARM-allstar mailing list
>>>>>>> ARM-allstar at hamvoip.org
>>>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>>>> 
>>>>>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>>>>>> 
>>>>> _______________________________________________
>>>>> 
>>>>> ARM-allstar mailing list
>>>>> ARM-allstar at hamvoip.org
>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>> 
>>>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>>> _______________________________________________
>>>> 
>>>> ARM-allstar mailing list
>>>> ARM-allstar at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>> 
>>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>> _______________________________________________
>>> 
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>> _______________________________________________
>> 
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org