[arm-allstar] v71 remote for allstar

[kd6gdb at gmail.com]

I purchased the DINAH as a means to connect my V71a to an allstar node
(RPI3b+) and control it (frequency agile) using the HAMLIB rigctl library.
To test i am using the command " rigctl -m 227 -r /dev/ttyUSB0 -s 38400 -v
" but instead of connecting i get the following result "rig_open: error =
IO error".

dmesg command shows me this;
[100015.051815] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
[100015.210097] usb 1-1.3: New USB device found, idVendor=0d8c,
idProduct=0013
[100015.212586] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[100015.217474] usb 1-1.3: Product: USB Audio Device
[100015.220055] usb 1-1.3: Manufacturer: C-Media Electronics Inc.
[100015.248651] input: C-Media Electronics Inc. USB Audio Device as
/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.3/0003:0D8C:0013.0002/input/input1
[100015.332103] hid-generic 0003:0D8C:0013.0002: input,hidraw0: USB HID
v1.00 Device [C-Media Electronics Inc. USB Audio Device] on
usb-3f980000.usb-1.3/input3

-- 
Pursuant to U.S. Code, title 47, Chapter 5, Sub chapter II, ß227,
"Any and all non solicited commercial E-mail sent to this address is
subject to a download and archival fee of $500.00 U.S.". E-mailing denotes
acceptance of these terms.