[arm-allstar] Streaming via Named Pipe Tee

[Doug Crompton]

Brad,

  Explain what you did again?  You have nptee running in Hamvoip.  So you
should be able to start and stop ezstream and it should pick back up. I
suspect ezstream has to be started after hamvoip initializes. The pipe
would not exist if lame started up before the outsource command completed.
How are you starting lame/ezstream? In rc.local?  Perhaps you need a sleep
in there of about 10 seconds or so before it starts.

*73 Doug, WA3DSP*
*http://wa3dsp.org <http://wa3dsp.org>*

On Thu, Apr 9, 2020 at 4:24 PM "Brad Trogdon via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have this function configured and it has worked well so far.  I have
> found that my node had a power event and I reset it with positive results
> and one exception.
>
> My stream is no longer working.
>
> Is there a way I can stop then start (ore restart) the process?   I am
> green in ArchLinux so sorry if this is simple.  So far I did try killall -9
> ezstream and killall -9 lame but its still not reconnect back to my IceCast
> server.
>
> thanks in advance.
>
> -Brad
> W4INT
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>