[arm-allstar] Linux to asterisk command help

[Matt Rhoades]

Doug,

You were correct.  Copy pasting from the howto was not working.
¯\_(ツ)_/¯   After
typing it in with the keyboard it worked.  I was using nano in iterm2 on
macOS. Lesson learned.  Thanks again for your help.

On Sun, Apr 5, 2020 at 10:56 PM Matt Rhoades <ki7uef at gmail.com> wrote:

> Echolink is running and tested (KI7UEF-L), I ran 'echolink dbdump' in the
> Asterisk CLI and see all the results just fine.
>
> modules.conf top several lines:
>
> [modules]
> autoload=yes
> ;noload=chan_voter.so
> ;noload=chan_usbradio.so
> ;noload=chan_irlp.so
> ;noload=chan_echolink.so
> ;noload=chan_simpleusb.so
> noload=app_hamvoip.so
>
> I believe echolink.conf to be configured correctly as I'm able to connect
> to my -L.
>
> On Sun, Apr 5, 2020 at 10:22 PM Matt Rhoades <ki7uef at gmail.com> wrote:
>
>> [root at allstar-47727 /]# asterisk -rx “echolink dbdump”
>> No such command '“echolink' (type 'help “echolink' for other possible
>> commands)
>>
>>
>> What gives?  This command runs great inside of the Asterisk CLI?
>>
>>
>>
>>
>>