[arm-allstar] People cutting out

[Mike Sullivan]

Sounds more like an internet issue to me. I’ve had it happen a couple times
on our node. Can you monitor that node directly from something like
Echolink?

Mike.

On Sun, Sep 22, 2019 at 18:41 "David McGough via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

>
> Dave,
>
> Not sure what might be happening.... Does your UV-82 unkey entirely?  If
> so, take a look at the simpleusb-tune-menu program, option V (the letter
> Vee). This will show the real-time PTT signal (and other signals). Does
> PTT drop here, too?
>
> If PTT doesn't drop in simpleusb-tune-menu, check the UV-82 transmitter
> timeout setting (using the CHIRP software, etc.). Is the timeout too
> short?
>
> If all these setting are okay, in your /etc/asterisk/rpt.conf file, what
> is the setting of the tx_timeout parameter?
>
> 73, David KB4FXC
>
>
>
> On Sun, 22 Sep 2019, "DAVE Enright via ARM-allstar" wrote:
>
> > This is driving me nuts. I goto a node and listen. Folks are talking back
> and forth, but as they are talking, it’s like they unkey the mike(they
> cut
> off) for a couple of seconds and it comes back talking as normal. Is there
> a setting that has to be changed in timeout???  I have a pi3 connected to a
> UV-82 w/ARA-1 soundboard.
>
> --
> *K3WHD ~ 73 Dave*
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>