[arm-allstar] allstar irlp not connecting

[Paul - KN2R]

Also make sure you "enable" IRLP in the allstar.env file.
Then reboot.


-----Original Message-----
From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"David McGough via ARM-allstar"
Sent: Friday, October 11, 2019 3:51 PM
To: "ku6v via ARM-allstar"
Cc: David McGough; ku6v
Subject: Re: [arm-allstar] allstar irlp not connecting


Look in the /etc/asterisk/modules file and make sure chan_irlp.so is set to
be loaded. In the base configuration, it's disabled.

For example, change:


noload=chan_irlp.so


...to:

;noload=chan_irlp.so


...By just commenting out the noload statement, chan_irlp.so will now be
automatically loaded. After changing this, restart asterisk or reboot.


73, David KB4FXC


On Fri, 11 Oct 2019, "ku6v via ARM-allstar" wrote:

>  
> 
> [Oct 11 12:37:20] WARNING[563]: channel.c:3039 ast_request: No channel
type
> registered for 'irlp'     I get this when I attempt a connect via CLI.
> 
>  
> 
> Also:     udp/tcp not working outbound on ports 873   8873   10000   15425
> 15426   15427.   I get this when I run the troublshoot script
> 
>  
> 
> IRLP node is 3620
> 
> Allstar 46533
> 
>  
> 
>  
> 
>  
> 
> 73 de KU6V
> 
>  
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> 

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org