[arm-allstar] send up to 10 streams with outstreamcmd

[David McGough]

Where/how does ezstream get launched?

73, David KB4FXC




On Tue, 19 Nov 2019, "Patrick Perdue via ARM-allstar" wrote:

> Almost a month later, I've finally gotten around to implementing this, 
> or trying to, anyway.
> 
> I compiled ntpee on a Debian 9 AMD64 system running my ASL node.
> 
> In /etc/rpt.conf under the node stanza, I have:
> 
> outstreamcmd=/usr/local/bin/nptee,pipe1,pipe2
> 
> /tmp/outsound/pipe1 and /tmp/outsound/pipe2 now exist. Both are 0 bytes.
> 
> Then I launch:
> 
> lame --preset cbr 64 -r -m m -s 8 --bitwidth 16 /tmp/outsound/pipe2 - 
> 2>/tmp/status
> 
> Estream says:
> 
> ezstream: Streaming from standard input
> 
> ezstream: No (more) data available on standard input
> 
> which I suppose is expected if there is no PCM data coming into the 
> pipe, which is what is going on by the looks of it.
> 
> Did I break something obvious in this configuration?
> 
> 
> On 10/30/2019 1:59 AM, "David McGough via ARM-allstar" wrote:
> 
> >
> > And, here is a slightly "refined" version, which properly buffers up to 60
> > seconds of PCM audio samples:
> >
> > https://hamvoip.org/downloads/nptee-v-0.2.tgz
> >
> >
> > 73, David KB4FXC
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>