[arm-allstar] Solved! RF getting into Node Processor

[Don Backstrom - AA7AU]

On Sat 09-Nov-19 19:00, "John Baxter via ARM-allstar" wrote:
> It was then that WA3EZT wisely suggested that RF from my HT was getting into the Pi when I transmitted near it!!!
> Suddenly it was clear - I had to avoid that kind of trouble by transmitting from a bit more distance from the Pi.

	I'm sure I repeating the obvious, but for those new to RF: it is best 
practice to be sure to *always* use the minimum xmit power setting 
necessary for your current application.

	In this case, if you're using an HT to talk to your Allstar node, 
always be certain that your HT is set to its lowest possible power 
setting (1W or less) to avoid affecting others who might also be using 
(sharing) that simplex freq and to cut down on RF generated issues in 
other devices. (Also: don't use TSQL on RX in your HT for this - you 
*want* to hear others who might be attempting to share that same freq).

	Just picking a nit,

	- Don - AA7AU