[arm-allstar] One node can connect to destination, another cannot

[David McGough]

Did this issue ever get resolved?





On Tue, 5 Nov 2019, "GERRY FILBY via ARM-allstar" wrote:

> Hi Folks,
> 
> Helping out a gentleman on the East coast running the (lastest) Hamvoip distribution.
> 
> David's node number is 50640 - he's trying to connect to 27200 - it fails after a quick connect
> 
> Asterisk CLI says:
> 
>     -- Call accepted by 52.23.107.220 (format g726aal2)
>     -- Format for call is g726aal2
>     -- Hungup 'IAX2/52.23.107.220:4569-3557'
>     -- Hungup 'DAHDI/pseudo-1051716926'
>     -- Remote UNIX connection
>     -- Remote UNIX connection disconnected
>     -- Remote UNIX connection
>     -- Remote UNIX connection disconnected
> 
> Supermon log says:
> 
> Tue Nov 05 15:29:38 EST 2019 == 50640 Disconnected AllStar 27200 =v= KB2EAR HUB node Ashburn, VA (52.23.107.220/4569)
> 
> And now the strange part - my node 48866 located here in San Franisco connects just fine, using the same codec.
> 
> His node 50640 can connect to any other destination no issues.
> 
> It's one of his favorite destinations, so I'd like to solve the problem if I can.
> 
> His node has been online for more than 24 hours so I'm doubtful that it's node list circulation issues - but maybe not.
> 
> If there's not enough info here to diagnose - point me in the right direction and I'll go on the hunt.
> 
> Thanks in advance,
> Gerry.
> W6WNG
> 
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>