[arm-allstar] Help with Motorola GM300 CTCSS

[David McGough]

Hi Rachid,

You need to program the GM300 to transmit a 97.4 Hz CTCSS on the channel 
(what Motorola calls "mode") setup for that repeater.


73, David KB4FXC

On Wed, 29 May 2019, "Rachid Karroo via ARM-allstar" wrote:

> Good day to everyone
> I am running the USB MAXTRACK FOB and have connected it to a Motorola GM300.
> I have no issues with the COS. The only problem is with regard to CTCSS.
> Our local repeater system uses CTCSS 97.4 Hz and it seems the GM300 is not
> initiating the required CTCSS in order to go in.
> Any help would be appreciated.
> I apologize if this email should not be sent here. If so then kindly
> contact me directly.
> 
> Thank you
> 73's
> 
> Rachid
> 3B8FP
> Node: 40248
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>