[arm-allstar] Echolink

Charles Powell 5h3dx.zinga at gmail.com
Wed May 22 17:35:05 EDT 2019


Here is my echolink.conf file.  The How-To on hamvoip.org <http://hamvoip.org/> is quite comprehensive.

73,

Charles - NK8O

[el0]
confmode=no
call=NK8O-L		           ; Change this!  You must be registered as XXXXXX-L or XXXXXX-R and this is different from your individual login
pwd=XXXXXXXX	 	   ; Change this!
name=Charles        	   ; Change this to your real name!
qth=Louisburg KS    	   ; Change this to your actual QTH!
email=XXXX at XXXX.net   ; Change this!
maxstns=10  	    		   ; set the maximum number of users here
rtcptimeout=10
node=963349         		   ; Echolink node number - Change this and use your own!
recfile=/tmp/recorded.gsm
astnode=47337      		   ; Change this to your active Allstar node number!
context=radio-secure
;server1=server1.echolink.org
;server2=server3.echolink.org
;server3=server5.echolink.org
server1=naeast.echolink.org <http://naeast.echolink.org/>	; echolink servers have changed
server2=nasouth.echolink.org <http://nasouth.echolink.org/>	; note changes
server3=servers.echolink.org <http://servers.echolink.org/>	; 
server4=backup.echolink.org <http://backup.echolink.org/>	;
; Outgoing message
message=This node is an AllStar bridge.\rPlease be aware you could be connected to hundreds of nodes worldwide\r\rGive your station ID if you transmit.
; Change following setting to your parameters
freq=
tone=
lat=38.631981  
lon=-94.677393
power=
height=
gain=
dir=0
;deny=
;permit=


> On May 22, 2019, at 3:40 PM, Boban Jovanovic YT1JB via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> On 22.05.2019. 22:29, "Charles Powell via ARM-allstar" wrote:
>> Echolink works extremely well on the HamVOIP distribution
> 
> It's nice news! Thank you!
> 
>> Remember the the port forwarding is UDP for 5198 and 5199, plus 5200 which is TCP.
> 
> 5200/TCP is outgoing but 5198/UDP and 5199/UDP is incoming. For registering EchoLink node does not need incoming ports. It must be seen in list of active EchoLink nodes, but I could not achive that.
> 
> Some config file would be nice to see here, please...
> 
> 73, Boban YT1JB
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org



More information about the ARM-allstar mailing list