[arm-allstar] Echolink

[Paul Kindell]

The help sheet said to port forward 5198 and 5199 and make sure 5200 was open in the fire wall so I did not port forward 5200.  I just did that and will see.  On my original node I had port forwared 5200 but it still does not show on the Echolink Status Page for repeaters.

After the 5200 port forward and just in case router reboot it is still showing parsing errors on the header.

73, Paul


> Sent: Wednesday, May 22, 2019 at 4:40 PM
> From: "Boban Jovanovic YT1JB via ARM-allstar" <arm-allstar at hamvoip.org>
> To: "ARM Allstar" <arm-allstar at hamvoip.org>
> Cc: "Boban Jovanovic YT1JB" <yt1jb at mail.ru>
> Subject: Re: [arm-allstar] Echolink
>
> On 22.05.2019. 22:29, "Charles Powell via ARM-allstar" wrote:
> > Echolink works extremely well on the HamVOIP distribution
>
> It's nice news! Thank you!
>
> > Remember the the port forwarding is UDP for 5198 and 5199, plus 5200 which is TCP.
>
> 5200/TCP is outgoing but 5198/UDP and 5199/UDP is incoming. For registering EchoLink node does not need incoming ports. It must be seen in list of active EchoLink nodes, but I could not achive that.
>
> Some config file would be nice to see here, please...
>
> 73, Boban YT1JB
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>