[arm-allstar] 2-node Pi B+

[Doug Crompton]

Please when you have a problem give more info. It is hard to diagnose with
a one liner!

#  dns-query 29764
+OK|radio at 141.155.178.10:4569/29764,141.155.178.10
#  dns-query 49593
+OK|radio at 141.155.178.10:4569/49593,141.155.178.10

So I know these are both your nodes and I assume they are both on the same
pi? As they are on the same port 4569.

Assuming they are on the same Pi I suspect you do not have an entry for
each in the extensions file or in the [nodes] stanza of rpt.conf.

If they are on different Pi's then you need to enter routing info in the
rpt.conf [nodes] stanza of each one pointing to each other using there
local IP addresses. In that case they also should be on different ports.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Sat, Mar 30, 2019 at 7:42 AM "KC2RQR via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Greetings;
>                Node 29764 does not connect to node 49593,
> WA2IAF-CLI*> chan_iax.c:9043 socket_process: rejected connect attempt from
> 127.0.0.1, request '49593 at radio-secure' does not exist
>
> Please, advice.
>
> 73, Anton/ KC2RQR
>       piRLP stn4012
>
>       AllStar piNode 29103
>
>       Echolink 361124
>         DMR 3136470
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org