[arm-allstar] remote node connect OK; using local repeater freq. has problems

[Tony Ross]

We have a local who has moved from the NW to AZ with his Allstar node 
using updated hamvoip software. My intent is to include him in the local 
FM morning round-robins.

My node radio is a BF-82. One of the programmed memories is the local 
VHF FM repeater with offset and "PL" tone, a courtesy tone and hangtime. 
I can link to his node and then switch frequency on the node radio to 
the local repeater. I have the idea that I can use my HT to talk to the 
local repeater as others do, and my BF-82 will receive the repeater 
output and transmit to the AZ node.

What happens is that the local repeater is held open Tx, which of course 
causes concern by all, especially me. The following rpt.conf parameters 
are supplied if anyone cares to make suggestions, munged with 
nodeID=VXWYZ and callsign=ABCDE:

connpgm=/usr/local/sbin/supermon/smlogger 1
discpgm=/usr/local/sbin/supermon/smlogger 0
rxchannel=SimpleUSB/usb
duplex=1

controlstates=controlstates
scheduler=scheduleVXWYZ
morse=morseVXWYZ
macro=macroVXWYZ
functions=functionsVXWYZ
phone_functions=functionsVXWYZ
link_functions=functionsVXWYZ
telemetry=telemetry
wait_times=wait-timesVXWYZ
erxgain=-3
etxgain=3
telemnomdb=0
telemduckdb=-9
context =  radio
callerid = Repeater <00000VXWYZ>
accountcode=RADIO
idrecording=|iDE ABCDE/L
hangtime=100
althangtime=100
tx_timeout=240000
idtime=600000
politeid=30000
rx_timeout=300000
rx_cosflap=20
nounkeyct=1
holdofftelem=1
telemdefault=2
beaconing=0
statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null 

rxchannel=dahdi/pseudo
duplex=1

controlstates=controlstates
scheduler=scheduleVXWYZ
morse=morseVXWYZ
macro=macroVXWYZ
functions=functionsVXWYZ
phone_functions=functionsVXWYZ
link_functions=functionsVXWYZ
telemetry=telemetry
wait_times=wait-timesVXWYZ
erxgain=-3
etxgain=3
telemnomdb=0
telemduckdb=-9
context =  radio
callerid = Repeater <00000VXWYZ>
accountcode=RADIO
idrecording=/etc/asterisk/local/node-id
idtalkover=|iDE ABCDE/L
hangtime=100
althangtime=100
tx_timeout=240000
idtime=600000
politeid=30000
rx_timeout=300000
rx_cosflap=20
unlinkedct=ct2
remotect=ct3
linkunkeyct=ct8
nounkeyct=0
holdofftelem=1
telemdefault=2
beaconing=0
statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null 

[morseVXWYZ]
speed=20
frequency=800
amplitude=4096
idfrequency=750
idamplitude=1024
[controlstates]
[scheduleVXWYZ]
[functionsVXWYZ]
1=ilink,1
2=ilink,2
3=ilink,3
4=ilink,4
5=macro,1
70=ilink,5
71=ilink,11
72=ilink,12
73=ilink,13
75=ilink,15
76=ilink,6
77=ilink,16
78=ilink,18
82=cmd,/usr/local/sbin/say24time.pl VXWYZ
61=autopatchup,context=pbx_server,noct=1,farenddisconnect=1,dialtime=20000,quiet=1
0=autopatchdn
980=status,3
[macroVXWYZ]
[telemetry]
ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
ct2=|t(660,880,150,2048)
ct3=|t(440,0,150,4096)
ct4=|t(550,0,150,2048)
ct5=|t(660,0,150,2048)
ct6=|t(880,0,150,2048)
ct7=|t(660,440,150,2048)
remotemon=|t(1209,0,50,2048)
cmdmode=|t(900,903,200,2048)
functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
patchup=rpt/callproceeding
patchdown=rpt/callterminated
[wait-timesVXWYZ]
telemwait=600
idwait=600
unkeywait=800
calltermwait=2000
[nodes]

VXWYZ = radio at 127.0.0.1/VXWYZ,NONE
1999 = radio at 127.0.0.1/1999,NONE
[memory]
#includeifexists custom/rpt.conf