[arm-allstar] Inactivity Timeout Message

[Doug Crompton]

Travis,

 No you can't mix formats.  Convert everything to one format and combine.
Also not all formats allow you to do that. I know gsm does which is the
format that most of the Asterisk sounds are. You can use sox to change
formats. You need to have one sound file specified in a command, not a
sting of files.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Thu, Mar 21, 2019 at 11:09 AM "Travis French via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Good Morning Doug,
>
> 2 more questions without going custom just yet:
>
> 1. Can ulaw, pcm, and/or gsm files be combined with the "cat" method? The
> first one I tried sounds like gibberish when played through VLC player.
>
> 2. Can I stack messages in rpt.conf for the lnkacttimerwarn= command? If
> so, what syntax would I need to add?
>
> lnkacttimerwarn=
> /var/lib/asterisk/sounds rpt/act-timeout-warning.ulaw
> /var/lib/asterisk/sounds/digits/30.gsm
> /var/lib/asterisk/sounds/seconds.gsm
>
>
> Thank you in advance,
>
> Travis E. French - K2PCB
>
> -----Original Message-----
> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
> Crompton via ARM-allstar"
> Sent: Wednesday, March 20, 2019 10:33 PM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] Inactivity Timeout Message
>
> Not sure what you are wanting to do but there is a 30.gsm and a
> seconds.gsm.  Combining them would give the voice 30 seconds.  There is
> also two timeout message in ulaw
>
> To combine two like formats (gsm works fine) just use cat...
>
> cat /var/lib/asterisk/sounds/digits/30.gsm
> /var/lib/asterisk/sounds/seconds.gsm > 30seconds.gsm
>
> creating a new file with the combined sounds.
>
> # locate 30.gsm
> /var/lib/asterisk/sounds/digits/30.gsm
>
> # locate seconds.gsm
> /var/lib/asterisk/sounds/seconds.gsm
>
> /var/lib/asterisk/sounds/rpt/timeout-warning.ulaw
> /var/lib/asterisk/sounds/rpt/timeout.ulaw
>
> For custom voice you have many options. See the tts howto at the
> hamvoip.org web page.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Wed, Mar 20, 2019 at 9:25 PM "Travis French via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Good Evening,
> >
> > I am looking to set an inactivity timeout timer and also activate the
> > warning message. I was finding that their is no "30seconds" file in
> > the sound folder. Is this available to download somewhere?
> >
> > Default: lnkacttimerwarn=30seconds
> >
> >
> > My alternate thought was to use one of the available messages and add
> > onto it. If I use the method below, how do I add to it (30 seconds)
> > using the recordings that are already there?
> >
> > lnkacttimerwarn=rpt/act-timeout-warning
> >
> >
> > Thanks in advance,
> >
> > Travis E. French - K2PCB
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>