[arm-allstar] link radios for an allstar node

larry larry at n7fm.com
Tue Mar 12 21:14:34 EDT 2019


What radio are you currently using for your IRLP node.
Seems to me you could use the same RF hardware. All you need to do is to 
build a cable from Allstar to the current IRLP radio.
No doubt you will not be using the IRLP board for the interface and will 
need either to use a C-Media modified USB sound Fob or purchase 
something like the RIM's that are available from Kevin at Masters 
Communication as the Allstar to radio interface.

Enlighten us more as to what IRlp hardware you currently use and what 
you want as the end result maybe I am not grasping your intention.

Larry - N7FM

On 3/12/19 3:11 PM, "Jed Barton via ARM-allstar" wrote:
> Hey guys,
> Jed.n1jbc here.  OK, so i need some help and input.
> Putting an allstar node on my repeater system.  What i am in need of
> is a node radio.  I was thinking of going with a kenwood, 1 of the
> commercial 1s like the tk8160, 8302, something like that.  as long as
> it's 1 of the kenwoods with the connecter on the back.  Anyone on here
> running this series of radios, and what fobs might work with it?
> I'm doing the conversion from strictly an IRLP node to the allstar
> IRLP node.  It's time to play ball.  Any ideas would be seriously
> appreciated.
> Cheers,
> Jed
> _______________________________________________
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

More information about the ARM-allstar mailing list