[arm-allstar] Auto muting

[Doug Crompton]

David,

   I need to know more about why you want to stay connected but mute audio.
You can control nodes without being connected to them as long as they are
yours and you have password access. I don't see any reason the stay
connected if you don't want audio feed. There is a monitor mode which
allows reception in one direction but not transmission but I am not sure
that is what you want.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Mar 11, 2019 at 2:27 PM "ddhcpracing via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Is it possible to leave a node connected to a hub node, but turn its
> inbound audio on and off via the hub node? Just like a repeater controller
> can.I have some remote nodes, that can only do out bound connections and
> some that can only be accessed via teamviewer. This would streamline system
> needs. All nodes are connected to repeaters and serve as site
> controllers.Thanks David
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>