[arm-allstar] EchoLink/connected Nodes behaviour when Autopatch to PSTN used

[Doug Crompton]

Dave,

 Your message bounced because of the images so I am repeating it here. I
believe this is a similar problem to no file play telemetry when Echolink
is connected and is on our list of things to fix so stay tuned. This
exhibits a keyup of the Echolink channel but no audio to it during the
transmission.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


From: David Martin <davom.1201 at gmail.com>

Hello All,

I am having issues when autopatch is used via *61_______ to call a PSTN
number.



The radio via the FOB behaves as expected with PTT occurring with speech
from the remote telephone.



The issue I have is a connected node (say 1999) go into a permanent TX
mode. The remote Echolink users seeing a permanent receive indication and
therefore cannot participate in the conversations.



This only happens when the PSTN is used via the SPA_3000 otherwise it
functions normally with Echolink users able to operate the radio and hear
radio traffic.



My voice access to the system is via an ATA and telephone connected to the
system.

Autopatch is set up using supermon and executing the appropriate DTMF
string.



Any suggestions? Is this a config issue? A SPA_3000 setting? Or is it even
possible?



Thanks Dave Martin VK3KQT