[arm-allstar] Messages found in CLI

[David McGough]

Hi Bryan,

These informational messages are generated when the asterisk verbosity 
level is set >= 5. 

To mute these messages, from the asterisk console:

set verbose 4


....And, they should stop.

73, David KB4FXC



On Fri, 5 Jul 2019, "Bryan St Clair via ARM-allstar" wrote:

> All, I am helping a node in South Africa that is having some strange audio
> issues.  While in the node, I saw the following messages come up while
> monitoring the CLI:
> 
> Node Variable dump for node xxxxx:
>    RPT_TXKEYED=0
>    RPT_NUMLINKS=1
>    RPT_LINKS=1,Tyyyyy
>    RPT_NUMALINKS=1
>    RPT_ALINKS=1,yyyyyTU
>    RPT_RXKEYED=1
>    RPT_ETXKEYED=0
>    RPT_AUTOPATCHUP=0
>     -- 8 variables
> Node Variable dump for node xxxxx:
>    RPT_RXKEYED=0
>    RPT_TXKEYED=0
>    RPT_NUMLINKS=1
>    RPT_LINKS=1,Tyyyyy
>    RPT_NUMALINKS=1
>    RPT_ALINKS=1,yyyyyTU
>    RPT_ETXKEYED=0
>    RPT_AUTOPATCHUP=0
>     -- 8 variables
> 
> [Jul  5 20:20:03] WARNING[364]: chan_iax2.c:10254 iax2_do_register:
> REGISTER-LOG: Sending registration request for 'xxxxx'
> [Jul  5 20:20:03] WARNING[371]: chan_iax2.c:7817 registry_rerequest:
> REGISTER-LOG: registry rereqquest
> 
> The Node Variable dump happens during any TX from the link, hundreds seen.
> 
> The Warning message appears every 20 seconds or so with no activity on the
> link.
> 
> Any help in understanding these messages would be appreciated.
> 
> Hardware        : BCM2835
> Revision        : a020d3
> 
> Check_Reg shows registered status.  V1.5 code, up to date.
> 
>