[arm-allstar] IPV6

[Chris Viningre]

Thanks Doug,
This was a question for me to learn more about this stuff. It came up from
when I was reading about other services being behind a NAT. I would also
like to put in a severance system and They have the same problem. Some have
suggested that going to IPV6 they found the ports open. This got me
thinking that maybe this could work for my home nodes that are behind a
NAT. Using iaxrpt or zoiper  requires cell service. Something we don't have
the luxury of having especially mobile. I have manage to get my node to
reach 50 miles in some cases and now with the autopatch working I can offer
phone service stranded motorist. Even for the sheriff and fire department
who is having a communication problem out here. Currently I have a Pi setup
up at a data center in Alabama that a friend and fellow ham offered. I have
a node there and that takes care of a way for someone to contact me. I'm
sending him another Pi and I'll add a 2nd node to my mobile for a back
channel for someone to call when I'm not on the hub.
Chris Viningre
70 W. Roadrunner
Salt Flat, Texas 79847
C:(915) 504-1510
chrisviningre at gmail.com
Ham Radio Call Sign: WS5B
Allstarlink Nodes:
45789 Southwest US Hub
45796 24h News and Nets




On Thu, Jan 17, 2019 at 10:43 PM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Chris,
>
>  If a port is behind NAT you cannot access it unless the owner of the NAT
> (router) allows you to by forwarding a port. By design router LAN ports are
> isolated from the outside world unless they are authorized. If you don't
> have control over the router inbound ports will not work from the Internet.
> It does not matter if it is IPV$ or IPV6.
>
> I think I know your situation and if I am right what you should do is set
> up a node at your home on the Internet. Forward ports 222 TCP and 4569 UDP
> in your router. Setup IAXRPT password if you have not already. Then use
> either iaxrpt or zoiper on your phone when you travel or are away from
> home. Using this you would be connected to your home node. You could also
> setup Echolink at home and use it on your phone to connect assuming where
> you want to connect has Echolink. Most hubs and many user nodes have it.
>
> Another option is to use a phone hotspot and a node you take with you. You
> do not need any port forwarding to connect out. In this case if you want to
> sked with someone who is calling you have them connect to your home node
> and you connect to your home node from wherever you are.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> * <http://www.crompton.com/hamradio>*
>
> On Thu, Jan 17, 2019 at 7:05 PM "Chris Viningre via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > If my provider has IPV6 can this be used to access my hidden node from
> > behind a NAT?
> >
> > Chris Viningre
> > 70 W. Roadrunner
> > Salt Flat, Texas 79847
> > C:(915) 504-1510
> > chrisviningre at gmail.com
> > Ham Radio Call Sign: WS5B
> > Allstarlink Nodes:
> > 45789 Southwest US Hub
> > 45796 24h News and Nets
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>