[arm-allstar] Radioless Node

[James Hause]

Okay Doug, will hold off for the announcement that it's available.


On Tue, Jan 1, 2019 at 10:21 AM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Jim,
>
>  George's email is - ggianios at verizon.net - but please don't inundate him
> with email just yet as the new products will not be available for several
> weeks to a month. There will be an announcement here at that time. The
> "yellow box" nodes have been available for over a year and are currently
> deliverable on receipt of order.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Tue, Jan 1, 2019 at 9:59 AM "James Hause via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Hi Doug,
>>    Well I probably missed something obvious, but how does one
>> contact George, WB3DZZ to discuss buying one?  Just via email ??
>> 73,
>> Happy New Year, Jim
>>
>> On Mon, Dec 31, 2018 at 9:26 PM "Doug Crompton via ARM-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>>
>> > Since you mentioned a radio-less node.....
>> >
>> > Happy New Year and I can officially announce some new products that will
>> > be available in the coming month from George, WB3DZZ. In addition to his
>> > current "Yellow Box" nodes which have been very successful with hundreds
>> > delivered he will be offering two FOBS and a radio-less node. All of
>> these
>> > products have been successfully tested and are now in production. FOB
>> > delivery will start sometime in January 2019 and radio-less nodes
>> shortly
>> > after that.
>> >
>> > The FOB's use the CM119B and have RF isolation on all radio and GPIO
>> > leads. One FOB is strictly for radio use with the five common signals
>> and
>> > the other has all the GPIO like the DMK URI. Although no price has been
>> set
>> > yet they will sell for considerably less than the DMK URI and less than
>> > most other FOB's currently out there. A photo of  the Full GPIO board is
>> > attached. It is smaller than most other boards and the board without
>> GPIO
>> > is smaller yet.
>> >
>> > The Radio-less node puts everything in one box and includes an adaption
>> of
>> > the Yaesu Microphone to overcome the problems with in mic. DTMF. It
>> uses an
>> > Arduino to convert Yaesu Mic. output to DTMF. It also includes an analog
>> > devices mic compressor/limiter chip which is necessary when using direct
>> > mic. input to an A/D. It makes a complete plug and play package with an
>> > extremely powerful 60W rated Class D audio amplifier. Connect 12V,
>> > Ethernet, and a speaker and you have a complete node. It can also be run
>> > wireless  on 2.4 or 5G. This is ideal for mobile operation or sites
>> where
>> > RF might be undesirable such as an EOC. Again final price has not been
>> set
>> > yet and it will not be available until later in January. A preliminary
>> > photo is attached. The final version will be in the same case but
>> slightly
>> > different layout.
>> >
>> > Also shown is the "Yellow Box" node with the new FOB board and new
>> layout.
>> >
>> > Final photos, prices and specs will be available soon.
>> >
>> >
>> > *73 Doug*
>> >
>> > *WA3DSP*
>> >
>> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>> >
>> >
>>
>> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org