[arm-allstar] Newsline to Play over Echolink Connected Users

[Kyle Krieg]

Hey Doug,

A few answers to your questions.

Right now I'm in the testing mode, which is not the final configuration.

Here is my setup right NOW.  I have duplex=1 because I have the URI
connected directly to a TYT9000 radio.  I connect in or others connect via
Echolink into my Allstar Echolink node with no issues, and Echolink users
hear others coming in from the AllStar nodes, hams using the node radio via
RF or other Echolink users connected to the same AllStar node via Echolink.

When I start playing newsline, it goes out over the RF and others connected
to my node via AllStar network can hear it when using the "G" switch in the
playnews command.  None of the Echolink users can hear newsline playing.

I'm sure it's a setting I'm missing.

This node I'm testing will eventually be connected to a CAT800 controller
on port 2 via the URI.  Port 1 will be connected to a Yaesu Fusion repeater
in analog mode.  I'm assuming we will need to switch the duplex setting to
=2 for connecting into the repeater.

Let me know if I need to pull of other stats from the node.

Thanks
Kyle